Bedienungsanleitung Trotec IC125LV (Seite 25 von 28) (Englisch)

756396

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

EN 24

Operating manual – thermal imaging camera IC085LV / IC125LV

Thermography terms

Span (contrast)

If the temperatures in the image are homogenously distributed

and close together, the image might not be very colourful /

contrasty, and the contours might not be easily visible. To

increase the image's contrast, press the up or down button of

the central menu keyboard. This increases or reduces the

temperature range set. The representation of individual thermal

areas in the image changes and becomes more contrasty.

Level (average temperature / temperature level /

brightness)

When changing the span (see Span), it often makes sense to

also adjust or shift the average temperature (Level). If, for

instance, the span is reduced to a minimum first and then the

level of this extremely narrowed temperature range is shifted

up/down, the image will become useless even in parts as it will

either have a totally excessive or insufficient contrast. However,

this allows you to visualize even the smallest temperature

differences in the object when traversing the individual

temperature sections.

Emission

Any object whose temperature lies above absolute

zero (-273.15°C) emits heat radiation. Its surface condition

(e.g. colour, structure, material composition etc.) and

temperature, among other things, determine how well the heat

is emitted. The emissivity of an object indicates who much heat

it radiates compared to an ideal black body. An ideal black body

has a theoretical emissivity of 1. Other factors such as

transmission and reflection can be neglected in this ideal case.

In practice, however, this is not possible. Surfaces that strongly

reflect in the visible light spectrum are often also highly

reflective in the infrared spectral range, as is the case with

polished aluminium for instance.

The formula is: transmission + reflection + emission = 1

In most cases, the transmission factor can be neglected. If the

surface to be thermographed is highly reflective, the share of

reflection increases correspondingly and the share of emission

decreases.

Example:

• transmission = 0

• reflection = 0.8

• emission = 0.2

Highly reflective surfaces reflect all temperatures whatsoever

from surrounding heat sources, which are thus indirectly

captured and measured by the thermal imaging camera, while

the surface temperature of the actual measuring object is not

being measured. To overcome this problem, special labels or

sprays with a high defined emissivity are often applied on the

surface to be measured.

The general rule is: The higher the emissivity, the lower the

reflectance, the easier the thermography.

Reflected temperature

The location of heat sources in the surroundings influencing the

measurement and the determination of the average temperature

which is emitted by them and can be reflected by the object to

be thermographed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec IC125LV Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec IC125LV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info