Bedienungsanleitung Trotec PAC3500S (Seite 12 von 25) (Englisch)

727657

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

12 EN

local air conditioner PAC 3500 S / PAC 3800 S / PAC 3810 S

Automatic switch-off

ü The device is switched on.

1. Press the TIMER button(24).

ð The TIMER LED(23) is illuminated.

ð The number of hours flashes on the segment

display(14) for approx. 10s.

2. Repeatedly press the UP(20) or DOWN(21) button to

select the desired number of hours until automatic switch-

off.

3. Press the TIMER button(24) to confirm the setting.

ð The segment display(14) continuously indicates the

number of hours until automatic switch-off.

ð After the predefined time, the device switches itself off.

4. In order to delete the setting, press the TIMER button(24)

again.

ð The TIMER LED(23) goes out.

Notes regarding automatic switch-off:

• Pressing the POWER button(18) deactivates the automatic

switch-off function.

Automatic defrost

At low ambient temperatures, ice may form at the evaporator.

The device will then carry out an automatic defrost.

The compressor switches off and the fan keeps running until

defrosting is completed. The duration of the defrost process can

vary.

Do not switch the device off during automatic defrost. Do not

remove the mains plug from the mains socket.

Night mode

The night mode can be activated when in cooling mode.

Night mode comes with the following settings:

• After 1 hour the preset temperature is increased by 1°C.

After anotherhour the preset temperature will again be

increased by 1°C.

• Temperature and fan speed cannot be changed in night

mode.

To activate night mode, please proceed as follows:

1. Select cooling mode.

2. Press the SLEEP button(26) on the remote control.

ð The cooling(13) and sleep LEDs(12) are illuminated.

3. In order to switch the night mode off, press the SLEEP

button(26) once again.

ð The sleep LED(12) turns off.

ð The selected operating mode remains active.

Swing function

The swing function can be switched on in any operating mode if

required.

By means of the swing function, the air outlet(2) is moved

automatically and thus ensures continuous air circulation.

1. Press the SWING button(25) on the remote control.

ð The ventilation flaps move up and down continuously.

2. Press the SWING button(25) again to stop the ventilation

flaps in a certain position and to switch off the swing

function.

Changing the unit °C / °F

The temperature in the segment display(14) can be indicated in

°C or °F.

Please proceed as follows to change the temperature unit:

1. Simultaneously press and hold the buttons UP(20) and

DOWN(21) for approx. 3s.

ð The displayed temperature is converted to the other unit.

Memory function

After a power failure during operation the device will

automatically be switched back on. The chosen operating mode

settings will be saved, a possibly programmed timer will not.

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Empty the condensation tray if necessary.

• If necessary, remove the condensation drain hose and any

residual fluid from it.

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC3500S Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC3500S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info