Bedienungsanleitung Trotec PAC3500SH (Seite 11 von 24) (Englisch)

689433

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

EN 11

local air conditioner PAC 3500 SH

3. Connect the condensation drain hose to the upper(6) or

lower hose connection(8).

4. Guide the other hose end to a suitable drain or sufficiently

dimensioned collection container. To ensure that the

condensate can run off, the condensation drain hose must

not be kinked, nor should it have to overcome an uphill

incline towards the drain.

ð For heating operation, use the adapter for the

condensation drain hose at the end of the hose.

Ventilation

Info

Remove the exhaust air hose during ventilation.

In ventilation mode the room air is circulated, but not cooled.

1. Press the Mode button(26) until the ventilation LED(14) is

illuminated.

ð Ventilation mode is selected.

ð The current room temperature is indicated on the

segment display(16).

2. Press the Fan speed button(23) to set the desired fan

stage.

ð The fan speed LED(19) indicates the selected fan stage.

When the automatic stage is activated, none of the fan

speed LEDs(19) is illuminated.

Setting the timer

The timer has two modes of operation:

• automatic switch-on upon expiry of a preset number of

hours.

• automatic switch-off upon expiry of a preset number of

hours.

This setting can be made at the device or using the remote

control.

Automatic switch-on and automatic switch-off may be enabled

at the same time. The timer LEDs(13) on the control panel will

then be illuminated simultaneously. When using the remote

control for setting, TIMER ON and TIMER OFF(42) will

additionally be indicated on the display(29) simultaneously.

The function can be set in all operating modes and also during

stand-by.

The number of hours can be set in increments of 0.5hours

(0.5h to 10h) or in increments of 1hour (10h to 24h).

Note

Do not leave the operating device unattended in a

freely accessible room with an activated timer.

Automatic switch-on

ü The device is switched off.

1. Press the Timer button(27) until the timeron LED(13) is

illuminated.

2. Set the desired number of hours by use of the Increase

value(24) and Decrease value(25) buttons.

ð The number of hours will be indicated on the segment

display(16) for approx. 5s.

ð The timer setting equals the desired number of hours.

ð After the predefined time, the device switches itself on.

Notes regarding automatic switch-on:

• If the device is disconnected from the power supply, all

settings for automatic switch-on are deleted.

• Manually switching the device on disables the automatic

switch-on function.

• If you select 0.0hours, the timer will be off.

Automatic switch-off

ü The device is switched on.

1. Press the Timer button(27) until the timeroff LED(13) is

illuminated.

2. Set the desired number of hours by use of the Increase

value(24) and Decrease value(25) buttons.

ð The number of hours will be indicated on the segment

display(16) for approx. 5s.

ð The timer setting equals the desired number of hours.

ð After the predefined time, the device switches itself off.

Notes regarding automatic switch-off:

• Pressing the On/Off button(21) deactivates the automatic

switch-off function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC3500SH Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC3500SH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info