Bedienungsanleitung Trotec PAE26 (Seite 11 von 21) (Englisch)

728000

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 10

air cooler PAE 26

Ventilation

In ventilation mode, you can select all 3fan speeds manually.

Please proceed as follows to activate ventilation:

1. Press the Mode button(23) until the ventilation LED(20) is

illuminated.

2. To adjust the fan stage, press the Speed button(24) until

the LED for the desired fan stage(19) is illuminated.

Air freshening

In air freshening mode, the fan speed increases and decreases

alternately to generate a pleasant, natural air stream.

Please proceed as follows to activate air freshening:

1. Press the Mode button(23) until the Air freshening

LED(20) is illuminated. The fan stages are automatically

adjusted.

Activating night mode

Night mode can be activated in combination with the 3fan

stages and air cooling.

1. Press the Mode button(23) until the Night mode LED(20)

is illuminated. Also select the desired fan speed.

ð Fan stage1: The device runs in air freshening mode.

ð Fan stage2: The device operates in air freshening mode

and after 30minutes switches over to fan stage1.

ð Fan stage3: The device operates in air freshening mode

and after 30minutes switches over to fan stage2. When

another 30minutes have passed, the device automatically

switches over to fan stage1.

Info

If you activate air cooling, an alarm signal will be

emitted when the water tank is empty, even in night

mode.

Setting the timer

The function can be set in all operating modes.

The number of hours can be between 1 and 7 and can be

adjusted in increments of 1h.

Automatic switch-off

ü The device is switched on.

1. Press the Timer button(26) until the desired number of

hours is displayed as a combination of the different Hours

LEDs(18).

ð The timer setting equals the desired number of hours.

ð The device switches off automatically after the set number

of hours has elapsed.

Notes regarding automatic switch-off:

• Pressing the On/ Off button(28) deactivates the automatic

switch-off function.

Remote control

All settings of the device can also be made using the remote

control included in the scope of delivery.

No. Designation Meaning

22 Humidify button Switching the air cooling mode on

or off

23 Mode button Selection button for ventilation, air

freshening and night mode

24 Speed button Setting the fan speed

26 Timer button Switching the timer on or off

1 h to 7 h

27 Oscillation button Switching the swing function on

or off

28 On/ Off button Switching the device on or off

Swing function

The swing function can be switched on in any operating mode if

required.

Behind the horizontal ventilation flaps, there are vertical air flaps

integrated in the device. By means of the swing function, these

air flaps are moved automatically and thus ensure continuous

air circulation.

1. Press the Oscillation button(27) to switch the swing

function on or off.

ð With activated swing function the OscillationLED(17) is

illuminated.

Memory function

If you switch the device back on after initial start-up, the

settings selected for the operating mode are saved. Any

activated timer will not be saved in the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAE26 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAE26

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info