Bedienungsanleitung Trotec PCSS 05-20V (Seite 18 von 20) (Englisch)

753908

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

18 EN

mini cordless portable circular saw PCSS 05-20V

The saw blade is loose:

• Check the saw blade for tight fit.

• Check the flange and flange nut for tight fit. Do not use

flanges or flange nuts whose bore hole is larger or smaller

than that of the saw blade.

The saw blade experiences difficulties penetrating the

material to be processed or the sawing performance is

insufficient:

• If the saw blade is worn, replace it with a new one.

• Check whether the chosen saw blade is suitable for the

material to be processed.

The cutting performance decreases:

• Check whether the saw blade is suitable for the

application.

• Keep the saw blade clean. If necessary, replace worn or

damaged saw blades.

• Resin or glue residues may impair the quality of the cut.

• Keep the venting slots clear to prevent the motor from

overheating.

• Check the charging status of the battery. The displayed

battery capacity might be within the red range indicating

that the battery should be charged.

The device becomes hot:

• Check whether the chosen saw blade is suitable for the

task to be carried out.

• Keep the venting slots clear to prevent the motor from

overheating.

Your device still does not operate correctly after these

checks?

Please contact the customer service. If necessary, bring the

device to an authorised specialist electrical company or to

Trotec for repair.

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug or the battery with wet or

damp hands.

• Switch off the device.

• Allow the device to cool down completely.

• Remove the battery from the device.

Warning of electrical voltage

Maintenance tasks which require the housing to be

opened must only be carried out by authorised

specialist companies or by Trotec.

Notes on maintenance

Inside the device, there are no parts that need to be maintained

or lubricated by the user.

Cleaning

The device should be cleaned before and after each use.

Note

The device does not have to be lubricated after

cleaning.

Warning of electrical voltage

There is a risk of a short-circuit due to liquids

penetrating the housing!

Do not immerse the device and the accessories in

water. Make sure that no water or other liquids can

enter the housing.

• Clean the device with a soft, damp and lint-free cloth.

Make sure that no moisture enters the housing. Protect

electrical components from moisture. Do not use any

aggressive cleaning agents such as cleaning sprays,

solvents, alcohol-based or abrasive cleaners to dampen

the cloth.

• Dry the device with a soft, lint-free cloth.

• Clean the saw blades immediately after use to keep them

free of resin or glue residues.

• Keep the connecting terminals on the device and charger

clean.

• Keep the connecting terminals on the battery pack clean.

• Keep the ventilation openings free from dust deposits to

prevent overheating of the motor.

• Non-coated saw blades can be protected against corrosion

by applying a thin layer of acid-free oil. Remove any oil

before starting to saw to prevent oil residues from reaching

the wood.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PCSS 05-20V Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PCSS 05-20V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info