Bedienungsanleitung Trotec PCSS 10-20V (Seite 21 von 24) (Englisch)

753909

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

EN 21

cordless portable circular saw PCSS 10-20V

Connecting the dust extraction system

You can connect a vacuum cleaner to the device. The adapter

included in the scope of delivery allows to connect smaller pipe

diameters.

Caution

Use a special vacuum cleaner to suck off harmful or

toxic materials.

1. If required, attach the adapter for dust extraction(29) to

the chip ejector(7).

2. Connect a suitable vacuum cleaner (e.g. industrial vacuum

cleaner) to the adapter for dust extraction(29).

Connecting a dust bag (optional)

For small-scale work, you can optionally connect a dust bag.

1. Insert a suitable dust or chip bag firmly into the chip

ejector(7).

2. Empty the dust bag in due time to guarantee proper

absorption of a sufficient amount of dust and chips.

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Switch off the device.

• Hold onto the mains plug while pulling the power cable of

the charger out of the mains socket.

• If required, allow the device to cool down.

• Remove the battery from the device (see Start-up chapter).

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Available accessories

Warning

Only use accessories and additional equipment

specified in the instructions.

Using insertion tools or accessories other than those

specified in the instructions may cause a risk of injury.

Designation Article number

Multiflex 20V 2.0Ah spare battery 6.200.000.303

Multiflex 20V 4.0Ah spare battery 6.200.000.320

Circular saw blade set 150mm 24 T,

3-piece

6.215.001.320

Circular saw blade set 150mm 40 T,

3-piece

6.215.001.321

Errors and faults

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

Troubleshooting tasks which require the housing to be opened

must only be carried out by an authorized specialist electrical

company or by Trotec.

Light smoke or odour is emitted during the first use:

• This is not a fault. These phenomena disappear after a

brief runtime.

The battery does not charge:

• Check whether the battery is correctly connected to the

quick charger.

Slide the battery into the quick charger in a way that the

battery terminals engage in the quick charger. The battery

must lock in place in the quick charger.

• Check the power connection.

• Check the power cable and mains plug for damages.

• Check the fuse (home).

• Check the quick charger for damages. Should the quick

charger be damaged, stop using it. Contact the Trotec

customer service.

• Check the battery terminals for dirt. Remove any dirt.

• The battery might be defective and have to be replaced.

Only use batteries of the same type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PCSS 10-20V Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PCSS 10-20V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info