Bedienungsanleitung Trotec PGGS 10-230V (Seite 11 von 13) (Englisch)

753343

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

EN 11

glue gun PGGS 10-230V

The glue only bonds on one side:

• The glue may have cooled down before you have pressed

the workpieces together. Press the workpieces to be

bonded together immediately. Heat up quickly cooling

materials with a heat gun. Apply the glue in dots if

necessary.

The glue comes undone after cooling:

• The surfaces may be greasy, smooth or dusty. You should

degrease, roughen or clean the surfaces.

• The material may not be suitable for bonding with hot-melt

glue. Use special glue sticks.

Glued tiles in humid environments come loose:

• Moisture penetrates into the glue joints. Use special

cement-based glue sticks.

Glued shoe soles come undone:

• Moisture causes the leather to swell. Use special glue

sticks.

Glue residues (strands) form:

• The feed trigger is held after gluing is completed. Let go of

the feed trigger in time.

• Wipe off the nozzle when lifting it off the workpiece.

The workpiece melts:

• The workpiece consists of heat-sensitive material, e.g.

styrofoam, and is not suitable for bonding with hot-melt

glue. Use special glue sticks.

You suffer burns on your fingers during gluing:

• The glue may penetrate through paper or textiles. Wear

protective gloves when working with the glue gun. If

necessary, use a heat-resistant pad, e.g. made of silicone.

• The workpiece consists of metal and may have heated up.

Wear protective gloves when working with the glue gun.

Note

Wait for at least 3 minutes after maintenance and

repair work. Only then switch the device back on.

Your device still does not operate correctly after these

checks?

Please contact the customer service. If necessary, bring the

device to an authorized specialist electrical company or to

Trotec for repair.

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Allow the device to cool down completely.

Warning of electrical voltage

Maintenance tasks which require the housing to be

opened must only be carried out by authorised

specialist companies or by Trotec.

Notes on maintenance

Inside the device, there are no parts that need to be maintained

or lubricated by the user.

Cleaning

The device should be cleaned before and after each use.

Note

The device does not have to be lubricated after

cleaning.

Warning of electrical voltage

There is a risk of a short-circuit due to liquids

penetrating the housing!

Do not immerse the device and the accessories in

water. Make sure that no water or other liquids can

enter the housing.

• Clean the device with a soft, damp and lint-free cloth.

Make sure that no moisture enters the housing. Protect

electrical components from moisture. Do not use any

aggressive cleaning agents such as cleaning sprays,

solvents, alcohol-based or abrasive cleaners to dampen

the cloth.

• Dry the device with a soft, lint-free cloth.

• Keep the connecting terminals on the device and device

holder clean.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PGGS 10-230V Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PGGS 10-230V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info