Bedienungsanleitung Trotec PHDS 10-230V (Seite 8 von 18) (Englisch)

753285

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

8 EN

Impact drill PHDS 10-230V

Technical data

Parameter Value

Model PHDS10-230V

Power supply 230V/ 50Hz

Power consumption 650W

Idle speed 50 to 3000rpm

Impact frequency 800 to 48000spm

Max. torque 7.5 Nm

Chucking range max. 13mm

Max. drilling diameter

Wood

Metal

masonry/ bricks

30 mm

10 mm

13 mm

Weight 2 kg

Protection class II /

Sound values according to EN62841-2-1

Sound pressure level 95 dB(A)

Sound power level 106 dB(A)

Uncertainty K 5 dB(A)

Vibration information according to EN62841-2-1

Total vibration emission value:

Impact drilling in brickwork with main

handle ah,ID

Uncertainty K

21.795 m/s2

1.5 m/s2

Impact drilling in brickwork with

additional handle ah,ID

Uncertainty K

12.605 m/s2

1.5 m/s2

Drilling in metal with main handle ah,D

Uncertainty K

4.041 m/s2

1.5 m/s2

Drilling in metal with additional handle

ah,D

Uncertainty K

2.713 m/s2

1.5 m/s2

Wear hearing protection.

Excessive noise can lead to hearing loss.

Information on noise and vibration:

• The specified total vibration and noise emission values

were measured by means of a test procedure standardized

in EN62841 and can be consulted for the comparison of

one power tool with another.

• The specified total vibration and noise emission values

can also be used for preliminary load assessment.

Caution

Vibration emissions can cause a health hazard if the

device is used for an extended period of time or if it is

not properly handled and maintained.

• The actual vibration and noise emission may differ from

the stated values during operation of the power tool. This

depends on how the power tool is used and especially on

the type of workpiece being processed. Try to keep the

vibration load to a minimum. Exemplary measures for

reducing the vibration load include wearing gloves during

operation of the tool and the limitation of working hours.

All parts of an operating cycle must be considered for this

(e.g. times at which the power tool is switched off and

times when it is switched on but runs without load).

Transport and storage

Note

If you store or transport the device improperly, the

device may be damaged.

Note the information regarding transport and storage of

the device.

Transport

For transporting the device, use the transport case included in

the scope of delivery in order to protect the device from external

influences.

Before transporting the device, observe the following:

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Allow the device to cool down.

• Remove the tool from the tool holder.

Storage

Before storing the device, observe the following:

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Allow the device to cool down.

• Remove the tool from the tool holder.

• Clean the device as described in the Maintenance chapter.

• For storing the device, use the transport case included in

the scope of delivery in order to protect the device from

external influences.

When the device is not being used, observe the following

storage conditions:

• dry and protected from frost and heat

• ambient temperature below 45°C

• protected from dust and direct sunlight inside the transport

case

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PHDS 10-230V Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PHDS 10-230V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info