Bedienungsanleitung Trotec PJSS10-230V (Seite 4 von 19) (Englisch)

753370

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

3 EN

Operating manual – 850W pendulum action jigsaw PJSS 10-230V

General Power Tool Safety Warnings – Power tool

use and care

•Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

•Disconnect the plug from the power source and / or

the battery pack, if detachable, from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

•Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

•Maintain power tools and accessories carefully. Check

for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

•Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

•Keep handles and gripping surfaces dry, clean and

free from oil and grease. Slippery handles and gripping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

General Power Tool Safety Warnings – Service

•Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Device-specific safety warnings for jigsaws

Warning of laser radiation

Laser class2, Pmax.: <1mW, λ: 650nm,

EN60825-1:2014

Do not look directly into the laser beam or the opening

from which it emerges.

Never point the laser beam at people, animals or

reflective surfaces. Even brief eye contact can lead to

eye damage.

Examining the laser output aperture by use of optical

instruments (e.g. magnifying glass, magnifiers and the

like) entails the risk of eye damage.

When working with a laser of class2, observe the

national regulations on wearing eye protection.

•Hold the device by its insulated gripping surfaces

when performing an operation where the insertion tool

may contact hidden wiring or its own cord. Cutting a

"live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

• Use appropriate detection equipment to track down

concealed supply lines or consult the local utility

companies. Contact with electrical lines may result in fire

and electric shock. Damaging a gas line may lead to an

explosion. Penetrating a water line causes property

damage and may cause an electric shock.

•Vibrations can be harmful to the human hand-arm

system. Keep the vibration exposure time to a minimum.

•Secure the workpiece. The grip of tensioning devices or a

vice is more secure than holding the workpiece only by

hand.

•Clean the shank of the saw blade before inserting it. A

dirty shank cannot be fastened securely.

•Check the saw blade for tight fit. A loose saw blade

could fall out and injure you.

•Before switching on the power tool, ensure that the

insertion tool can move freely. If the device is switched

on with a jammed insertion tool, the resulting forces can

be extreme causing the device to kick out sideways.

•Do not work on moistened material or moist surfaces.

•Only hold the power tool against the workpiece when

the tool is switched on and running. Otherwise there is

a risk of kickbacks.

•Make sure that the base plate is positioned securely

on the contact face during sawing. A jammed saw blade

could break or cause a kickback.

•Keep your hands out of the sawing area. Do not reach

underneath the workpiece. Risk of injury upon contact with

the saw blade.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PJSS10-230V Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PJSS10-230V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info