753919
8
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
8 EN
3-in-1 multi-functional sander PMSS 10-220
Scope of delivery
1x Device PMSS 10-220
1x Dust collector
1x Reducer
1 x Orbital sanding plate
1 x Random orbital sanding plate
1 x Delta sanding plate
3 x Sanding sheet for wood, grain size:80
for random orbital sanding plate, orbital sanding plate,
delta sanding plate
3 x Sanding sheet for wood, grain size:240
for random orbital sanding plate, orbital sanding plate,
delta sanding plate
8x Rubber pin (4x preassembled)
8 x Screw (4x preassembled)
1 x Transport case
1x Manual
Technical data
Parameter Value
Model PMSS10-220
Mains connection 1/N/PE ~ 230-240V/
50Hz
Power consumption 220W
Nominal oscillation rate 14,000–24,000opm
Idle speed 7,000– 12,000rpm
Orbit diameter 2mm
Grinding surface
Delta sanding plate
Random orbital sanding plate
Orbital sanding plate
108 cm2
116 cm2
165 cm2
Cable length 3 m
Protection class II /
Weight 1.5kg
Vibration information according to EN62841
Vibration emission value main
handle ah
6.732m/s²
Uncertainty K 1.5m/s²
Sound values according to EN62841
Sound pressure level LpA 78.4dB(A)
Sound power LWA 89.4dB(A)
Uncertainty K 3 dB
Wear hearing protection.
Excessive noise can lead to hearing loss.
Information on noise and vibration:
The specified total vibration and noise emission values
were measured by means of a test procedure standardized
in EN62841 and can be consulted for the comparison of
one power tool with another.
The specified total vibration and noise emission values
can also be used for preliminary load assessment.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
The actual vibration and noise emission may differ from
the stated values during operation of the power tool. This
depends on how the power tool is used and especially on
the type of workpiece being processed. Try to keep the
vibration load to a minimum. Exemplary measures for
reducing the vibration load include wearing gloves during
operation of the tool and the limitation of working hours.
All parts of an operating cycle must be considered for this
(e.g. times at which the power tool is switched off and
times when it is switched on but runs without load).
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trotec PMSS 10-220 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trotec PMSS 10-220

Trotec PMSS 10-220 Bedienungsanleitung - Deutsch - 21 seiten

Trotec PMSS 10-220 Bedienungsanleitung - Holländisch - 20 seiten

Trotec PMSS 10-220 Bedienungsanleitung - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info