Bedienungsanleitung Trotec PPOS10-20V (Seite 13 von 15) (Englisch)

753362

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

EN 13

cordless polisher PPOS 10-20V

The device does not start:

• The battery power might be too low. Recharge the battery.

• Check whether the battery is correctly connected to the

device.

Slide the battery onto the device in a way that the battery

terminals engage. The battery must lock in place in the

device.

• Check the battery terminals for dirt. Remove any dirt.

Info

Wait for at least 10 minutes before switching the

device back on.

The motor is running but polishing the surface does not

work

• Check whether you chose the appropriate polishing bonnet

for your current working step. Use the cloth polishing

bonnet for applying the polishing agent. Use the synthetic

fibre polishing bonnet for polishing the surfaces.

• Check whether the polishing agent has lightly dried on the

entire surface. If the polishing agent is still wet, it will be

smudged by the synthetic fibre polishing bonnet.

• Check whether you may have applied too much polishing

agent. Excess polishing agent will only make it more

difficult to remove the layer of the polishing agent on the

paint and does not improve the result.

The device becomes hot:

• Keep the venting slots clear to prevent the motor from

overheating.

Info

Wait for at least 10 minutes before switching the

device back on.

Your device still does not operate correctly after these

checks?

Please contact the customer service. If necessary, bring the

device to an authorized specialist electrical company or to

Trotec for repair.

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug or the battery with wet or

damp hands.

• Switch off the device.

• Allow the device to cool down completely.

• Remove the battery from the device.

Warning of electrical voltage

Maintenance tasks which require the housing to be

opened must only be carried out by authorised

specialist companies or by Trotec.

Notes on maintenance

Inside the device, there are no parts that need to be maintained

or lubricated by the user.

Cleaning

The device should be cleaned before and after each use.

Warning of electrical voltage

There is a risk of a short-circuit due to liquids

penetrating the housing!

Do not immerse the device and the accessories in

water. Make sure that no water or other liquids can

enter the housing.

• Clean the device with a soft, damp and lint-free cloth.

Make sure that no moisture enters the housing. Protect

electrical components from moisture. Do not use any

aggressive cleaning agents such as cleaning sprays,

solvents, alcohol-based or abrasive cleaners to dampen

the cloth.

• Dry the device with a soft, lint-free cloth.

• Keep the connecting terminals on the device and charger

clean.

Cleaning the polishing bonnets

• Only wash the polishing bonnets by hand and allow to air

dry.

• Remove the polishing bonnet if you do not use it and store

the device with the polishing disc facing upwards in order

for the polishing disc to dry and to maintain its shape.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PPOS10-20V Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PPOS10-20V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info