753906
12
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
12 EN
sabre saw PRCS 10-850
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Check whether the fixed saw blade is suitable for the
intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Hold onto the power tool with both hands.
4. Guide the saw towards the workpiece.
5. Position the guide shoe(9) on the workpiece.
6. Press the on/off switch(3) and hold it during operation.
You can control the stroke rate by pressing the on/off
switch(3): press lightly to select a low stroke rate; press
firmly to select a high stroke rate.
ðThe LED work light(11) is illuminated.
3
7. After completing the sawing operation, let go of the on/off
switch(3) to stop the device.
666
3
ðThe LED work light(11) goes out.
Selecting the stroke rate
The required stroke rate depends on various factors. For
example, the workpiece as well as the activity and the working
conditions have an impact on the required stroke rate. Working
with plastic or aluminium, for instance, requires a low stroke
rate. Entering the material during plunge-cutting, for instance,
requires a high stroke rate.
Change stroke rate during operation:
During normal operation the stroke rate is controlled by pressing
the on/off switch(3):
light pressure = low stroke rate
firm pressure = high stroke rate
press in completely = maximum stroke rate
Preset maximum stroke rate:
You can select the maximum stroke rate for the operation via
the setting wheel(2):
1. Turn the setting wheel(2) towards the + or - to increase or
reduce the maximum stroke rate.
2
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch the device off.
If required, allow the device to cool down.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Remove the tool from the tool holder (see Start-up
chapter).
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trotec PRCS 10-850 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trotec PRCS 10-850

Trotec PRCS 10-850 Bedienungsanleitung - Deutsch - 17 seiten

Trotec PRCS 10-850 Bedienungsanleitung - Holländisch - 17 seiten

Trotec PRCS 10-850 Bedienungsanleitung - Französisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info