Bedienungsanleitung Trotec PTNS10-3.6V (Seite 4 von 17) (Englisch)

753358

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

3 EN

Operating manual – cordless tacker PTNS 10-3,6V

General Power Tool Safety Warnings – Power tool

use and care

•Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

•Disconnect the plug from the power source and / or

the battery pack, if detachable, from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

•Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

•Maintain power tools and accessories carefully. Check

for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

•Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

•Keep handles and gripping surfaces dry, clean and

free from oil and grease. Slippery handles and gripping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

General Power Tool Safety Warnings – Battery tool

use and care

•Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

•Use power tools only with specifically designated

battery packs. Use of any other battery packs may create

a risk of injury and fire.

•When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

•Under abusive conditions, liquid may be ejected from

the battery. Avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

•Do not use a damaged or modified battery. Damaged or

modified batteries can behave unexpectedly and lead to

fires, explosions or injuries.

•Do not expose a battery to fire or excessively high

temperatures. Exposure to fire or temperatures above

130°C (265°F) may cause an explosion.

•Follow all the instructions for charging and never

charge the battery or the cordless tool outside the

temperature range specified in the operating

instructions. Incorrect charging or charging outside of the

permissible temperature range can destroy the battery and

increase the risk of fire.

General Power Tool Safety Warnings – Service

•Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Safety instructions for tackers

•Always assume that the power tool contains fasteners

(wire nails or staples). Careless handling of the tacker

can result in an unexpected ejection of wire nails or

staples and lead to personal injury.

•Do not point the power tool towards yourself or anyone

nearby. Unexpected triggering will eject a wire nail or

staple which might cause an injury.

•Do not actuate the power tool until it is placed firmly

against the workpiece. If the power tool is not in contact

with the workpiece, the staple or wire nail might ricochet.

•Disconnect the power tool from the mains connection

or battery when a wire nail or staple is jammed inside.

If not de-energized, the tacker could be actuated by

accident while removing a jammed staple or wire nail.

•Exercise particular caution when removing a jammed

wire nail or staple. The mechanism may be under tension

and the staple or wire nail could be forcefully ejected while

you attempt to eliminate the jam.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PTNS10-3.6V Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PTNS10-3.6V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info