Bedienungsanleitung Trotec TCH18E (Seite 7 von 11) (Englisch)

727465

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

EN 7

convector TCH 18 E / TCH 19 E

Operation

Operating elements

TCH 18 E / TCH 19 E

No. Designation

8 flip switch heating levels 1250 W

(together with flip switch 9 = 2000W)

9 flip switch heating levels 750 W

(together with flip switch 8 = 2000W)

10 Rotary switch room thermostat

Switching the device on

1. Plug the device into a sufficiently fused socket.

2. Set the flip switch (8, 9) to On to select the desired heating

capacity.

You can actuate one flip switch for a capacity of 750W(9)

or 1250W(8), or both flip switches for the maximum

capacity of 2000W.

ð The lamp at the respective flip switch only lights up

when the room thermostat is switched on.

Setting the room thermostat

1. Select the desired temperature via the infinitely variable

rotary switch(10) of the room thermostat.

ð If the room thermostat is switched on, the lamps of the

activated heating levels will light up.

The room thermostat controls the room temperature

automatically:

• When the set value is exceeded, the heating switches off.

• When the set value is fallen below, the heating

automatically switches back on.

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Set both flip switches to Off. Turn the room thermostat's

infinitely variable rotary switch(10) counter-clockwise to

position MIN. The lamps at the flip switches turn off.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Allow the device to cool down completely.

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Errors and faults

Warning of electrical voltage

Tasks which require the housing to be opened

must only be carried out by authorised specialist

companies or by Trotec.

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

The device does not start:

• Check the power connection.

• Check the power cable and mains plug for damages.

• Check the on-site fusing.

• Check the room temperature. The room thermostat may

have switched off, because the desired room temperature

has been reached.

• The room thermostat might be defective. Have a defective

room thermostat replaced by a specialist electrical

company.

• Check whether the overheating protection has tripped, see

chapter Safety.

• Wait for 10minutes before restarting the device. If the

device is not starting, have the electrics checked by a

specialist company or by Trotec.

The air current is reduced:

• Check the air inlet and outlet. Make sure that air inlet and

outlet are not obstructed. Remove any dirt. Observe the

minimum distance from walls or other objects according to

the technical data.

Note

Wait for at least 3 minutes after maintenance and

repair work. Only then switch the device back on.

Your device still does not operate correctly after these

checks?

Please contact the customer service. If necessary, bring the

device to an authorized specialist electrical company or to

Trotec for repair.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TCH18E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TCH18E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info