Bedienungsanleitung Trotec TCH2050E (Seite 8 von 13) (Englisch)

727801

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

8 EN

convector TCH 2050 E

No. Designation Meaning

14 Decrease value

button

For setting the desired room

temperature (15°C to 35°C) or the

number of hours for the timer (1to

24h)

15 MODE

button

For timer programming

For temperature setting

16 Increase value

button

For setting the desired room

temperature (15°C to 35°C) or the

number of hours for the timer (1to

24h)

17 Power

button

For activating the low heating level

For activating the high heating level

For activating standby mode

18 Segment display Indication of the current room

temperature during operation

Indication of the desired room

temperature during temperature

adjustment

Indication the number of hours during

timer programming

Switching the device on

Once you have completely installed the device as described in

the Start-up chapter, you can switch it on.

1. Set the on/off switch(6) toI.

ð An acoustic signal is emitted.

ð The device is now in standby mode.

ð The current room temperature is indicated on the

segment display(18).

2. Press the power button(17).

ð The device starts at the low heating level.

ð The low heating levelicon(9) is illuminated.

Info

In standby mode, the device memorizes the room

temperature setting.

Setting the heating level

You can select the following heating levels:

• low heating level (heating capacity 1200W)

• high heating level (heating capacity 2000W)

1. Press the powerbutton(17) to set the low heating level.

ð The low heating levelicon(9) will be displayed.

2. Press the powerbutton(17) again to set the high heating

level.

ð The icon for the high heating level(10) will be indicated

in addition to the icon for the low heating level(9).

Setting the desired room temperature

The room temperature determined by the temperature sensor is

indicated on the segment display(18). You can set the desired

room temperature at any time.

1. Repeatedly press the MODEbutton(15) until the

temperature symbol(11) starts flashing.

ð The desired room temperature is displayed.

2. Press the buttons increase value(16) or decrease

value(14) to adjust the desired room temperature. Setting

is possible in the range between 15°C and 35°C in

increments of 1°C.

ð The desired room temperature is saved and indicated on

the segment display(18) for approx.5seconds. Then

the current room temperature is displayed again.

Info

The desired room temperature should be higher than

the current room temperature.

Setting the timer

The timer has the following modes of operation:

• automatic switch-on upon expiry of a preset number of

hours

• automatic switch-off upon expiry of a preset number of

hours

The number of hours can be between1 and24 and can be

adjusted in increments of 1hour.

Note

Do not leave the operating device unattended in a

freely accessible room with an activated timer.

Automatic switch-on

ü The device is switched on.

ü The device is in standby mode.

1. Press the MODEbutton(15).

ð The timericon(12) flashes.

2. Select the desired number of hours by use of the increase

value(16) or decrease value(14) button.

ð The number of hours will be flashing on the segment

display(18) for approx. 5seconds.

ð The time until automatic switch-on is saved.

ð The timericon(12) flashes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TCH2050E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TCH2050E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info