Bedienungsanleitung Trotec TFH22E (Seite 6 von 13) (Englisch)

727180

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

5 EN

Operating manual – fan heater TFH 20 E / TFH 22 E

Transport and storage

Note

If you store or transport the device improperly, the

device may be damaged.

Note the information regarding transport and storage of

the device.

Transport

Before transporting the device, observe the following:

• Switch the device off.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Do not use the power cable to drag the device.

• Allow the device to cool down sufficiently.

Storage

Before storing the device, observe the following:

• Allow the device to cool down sufficiently.

When the device is not being used, observe the following

storage conditions:

• dry and protected from frost and heat

• in an upright position where it is protected from dust and

direct sunlight

• with a cover to protect it from invasive dust if necessary

• Place no further devices or objects on top of the device to

prevent it from being damaged.

Assembly and installation

Scope of delivery

• 1 x Fan heater

• 1 x Manual

Unpacking the device

1. Open the cardboard box and take the device out.

2. Completely remove the packaging.

3. Fully unwind the power cable. Make sure that the power

cable is not damaged and that you do not damage it during

unwinding.

Start-up

Info

Odours might arise upon initial start-up or after a

longer period of non-use.

When positioning the device, observe the minimum distance

from walls or other objects as described in the Technical data

chapter.

• Before restarting the device, check the condition of the

power cable. If there are doubts as to the sound condition,

contact the customer service.

• Position the device on even, stable and heat-insensitive

ground in a way to prevent it from tipping over.

• Do not create tripping hazards when laying the power

cable or other electric cables, especially when positioning

the device in the middle of the room. Use cable bridges.

• Make sure that extension cables are completely unrolled.

• Make sure that no curtains or other objects interfere with

the air flow.

• Do not position the device directly below a wall socket.

• Put up the device in a way that no person, animal or plant

is positioned in its direct flow path upon switch-on.

• TFH22E: Bear in mind that the device will be rotating

once you activate the oscillation function. On that account

it has an effective range of about 90° towards the front

and sides.

• Make sure that the device cannot come into contact with

moisture or water.

Connecting the power cable

• Insert the mains plug into a properly secured mains

socket.

• Make sure that the power cable is guided along the back

of the device. Never guide the power cable along the front

of the device!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TFH22E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TFH22E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info