Bedienungsanleitung Trotec TRH20E (Seite 9 von 15) (Englisch)

727850

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

EN 9

oil-filled radiator TRH 20 E / TRH 21 E / TRH 22 E / TRH 23 E

No. Designation

8 rotary switch room thermostat

9 rotary switch for heating level selection

TRH 20 E/ TRH 22 E

level1: 800 W

level2: 1,200W

level3: 2,000W

TRH 21 E/ TRH 23 E

level1: 1000W

level2: 1,500W

level3: 2,500W

10 operating control lamp

Switching the device on

Once you have completely installed the device as described in

the Start-up chapter, you can switch it on.

Info

The device will not be switched on until the room

temperature falls below the temperature set at the

room thermostat.

Setting the heating level

1. Set the rotary switch for heating level selection(9) to the

desired heating level.

Setting the room thermostat

1. Select the desired temperature via the infinitely variable

rotary switch(8) of the room thermostat.

ð When the room thermostat is switched on the operating

control lamp(10) will be illuminated.

ð After approx. 10min the deviceTRH 20 E/ TRH 22 E

will have reached the set heat output.

ð After approx. 8min the deviceTRH 21 E/ TRH 23 E will

have reached the set heat output.

To find the ideal thermostat setting, please proceed as follows:

• Set the thermostat control to maximum.

• As soon as the desired temperature has been reached,

slowly turn the thermostat control back until the operating

control lamp(10) goes out.

• The device now automatically maintains the desired

temperature level.

The room thermostat controls the room temperature

automatically:

• Upon reaching the set value in heating level2 and3 the

device reduces its heating performance to level1.

• When falling below the set value, the heating will

automatically switch back over to level2 or level3.

When the device is set to heating level1, the room temperature

will not be controlled automatically.

Frost monitor function:

1. Set the heating level to level1.

2. Turn the rotary switch for the room thermostat(8) to a

position just above-. In this position, the room thermostat

switches on the heating automatically if the room

temperature drops below the frost protection temperature.

Switching on the turbo blower (TRH 22 E/ TRH 23 E)

1. Set the flip switch for the blower(7) toI.

ð The lamp at the flip switch will be illuminated.

ð The blower will start to run when the device produces

heat.

ð The blower will turn off when the room thermostat

switches off the heating.

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Set both rotary switches(8, 9) to position0 or-.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Allow the device to cool down completely.

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TRH20E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TRH20E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info