Bedienungsanleitung Trotec TTK54E (Seite 9 von 23) (Englisch)

726872

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

EN 9

dehumidifier TTK 54 E / TTK 66 E

Setting the desired relative room humidity

You can only change the relative room humidity in

dehumidification mode.

1. Press the Increase value(19) or Decrease value button(21)

to set the relative room humidity. Setting is possible within

the range between 35% and 85% in steps of 5%.

ð The desired relative room humidity is indicated in the

segment display(20) for approx.5seconds. Then the

current relative room humidity is displayed again.

Setting the fan speed

With this function you can choose between low, medium and

high fan speed. The fan speed can only be adjusted in

dehumidification mode. The default setting for the laundry

drying function is the highest level.

1. Repeatedly press the FAN button(22) to select the desired

fan speed.

Continuous operation

The device dehumidifies the air constantly and regardless of the

relative room humidity. The desired relative room humidity

cannot be adjusted in this operating mode.

1. Press the MODE button(18) until the Cont. LED(14) is lit.

ð Continuous operation is selected.

Info

For continuous operation the condensation drain hose

can be connected in order to continuously drain the

accumulating condensate.

Comfort mode

Comfort mode ensures an agreeable humidity level ranging

between 45% and 55%. Depending on the room temperature

the device automatically regulates the convenient humidity level

choosing a value from 45% – 50% – 55%.

In this operating mode it is not possible to regulate the humidity

level manually.

1. Press the MODE button(18) until the Comfort LED(15) is lit

to switch comfort mode on or off.

Setting the timer

For the device to switch on or off automatically after a

predefined number of hours (max. 24hrs) you can programme

the timer.

The timer can be programmed in increments of 0.5hours (0 to

10h) or in increments of 1hour (10 to 24h).

The timer can be set in all operating modes.

You can activate the function regardless of the device being

switched on or off.

Note

Do not leave the operating device unattended in a

freely accessible room with an activated timer.

Automatic switch-on

ü The device is switched off.

1. Press the TIMER button(23) to programme automatic

switch-on.

ð The TIMER LED(10) is lit.

ð The segment display(20) indicates the number of hours

until automatic switch-on. Standard: 0.0

2. Press the Increase value(19) and Decrease value

buttons(21) to set a number of hours until automatic

switch-on.

ð The number of hours is indicated on the segment

display(20) for approx.5s. Then the current humidity

level of the room will be indicated.

ð The timer setting equals the desired number of hours.

ð After the predefined time, the device switches itself on.

Automatic switch-off

ü The device is switched on.

1. Press the TIMER button(23) to programme automatic

switch-off.

ð The TIMER LED(10) is lit.

ð The segment display(20) indicates the number of hours

until automatic switch-off. Standard: 0.0

2. Press the Increase value(19) and Decrease value

buttons(21) to set a number of hours until automatic

switch-off.

ð The number of hours is indicated on the segment

display(20) for approx.5s. Then the current humidity

level of the room will be indicated.

3. The device keeps running until the given switch-off time

has expired or until the device is switched off manually.

ð The timer setting equals the desired number of hours.

ð After the predefined time, the device switches itself off.

Note

You can deactivate automatic switch-on and switch-off

by setting the respective number of hours back to 0 or

by manually switching the device on or off.

If error codeP2 is indicated on the segment

display(20), the timer is also disabled.

A full condensation tank can cause the device to be

switched off before the set number of hours until

automatic switch-off have elapsed.

Memory function

After a power failure during operation the device will

automatically be switched back on after a while. The selected

settings are saved. Any programmed timer settings will not be

saved.

Auto stop function

If the water tank is full, not inserted correctly or the relative

room humidity has been reached, the device will stop

automatically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TTK54E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TTK54E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info