Bedienungsanleitung Trotec TTK72E (Seite 9 von 21) (Englisch)

726860

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 9

dehumidifier TTK 53 E / TTK 72 E

The fan runs at low speed and the fan speed cannot be

changed.

1. Press the MODE button(16).

ð The indication of the currently selected operating mode

flashes.

2. Press the MODE button(16) until the CONTINUOUS

indication(20) flashes.

3. Wait for approx. 5seconds in order to save the setting.

ð Dehumidification mode is selected.

ð The CONTINUOUSindication (20) is illuminated.

4. Press the arrow buttons(12, 14) to adjust the relative room

humidity.

5. Wait for approx. 5seconds in order to save the setting.

For setting the relative room humidity

You can only change the relative room humidity in

dehumidification mode.

1. Press the arrow buttons(12, 14) to adjust the relative room

humidity. Setting is possible in the range between 30%

and 80% in increments of 5%.

ð The desired relative room humidity is indicated in the

segment display(13) for approx.5seconds. Then the

current relative room humidity is displayed again.

Colour LED for current room humidity

Regardless of the operating mode, the colour LED indicates the

current relative room humidity by means of 3 different colours.

LED colour Meaning

Blue

Relative room humidity below 55%

Green

Optimal relative room humidity between 55%

and 70%

Red

Illuminated: relative room humidity above 70%

Flashes: water tank full or not inserted correctly

(accompanied by an acoustic signal)

Continuous operation

The device dehumidifies the air constantly and regardless of the

relative room humidity.

The fan runs at low speed and the fan speed cannot be

changed.

1. Press the MODE button(16).

ð The indication of the currently selected operating mode

flashes.

2. Press the MODE button(16) until the CONTINUOUS

indication(20) flashes.

3. Wait for approx. 5seconds in order to save the setting.

ð The CONTINUOUSindication (20) is illuminated.

4. Press the arrow buttons(12, 14) until CO is indicated in the

segment display(13).

5. Wait for approx. 5seconds in order to save the setting.

ð Continuous operation(20) is selected.

Automatic operation

The relative room humidity is preset to 55 % and cannot be

changed.

If the relative room humidity lies between 55 % and 70 %, the

fan automatically switches over to low speed.

Below a relative room humidity of 55%, the compressor

switches off.

Above a relative room humidity of 70 %, the fan runs at the

highest level.

1. Press the MODE button(16).

ð The indication of the currently selected operating mode

flashes.

2. Press the MODE button(16) until the AUTOMATIC

indication(19) flashes.

3. Wait for approx. 5seconds in order to save the setting.

ð Automatic mode is selected.

ð The AUTOMATICindication (19) is illuminated.

Ventilation

The fan runs at low speed. The compressor does not run.

1. Press the MODE button(16).

ð The indication of the currently selected operating mode

flashes.

2. Press the MODE button(16) until the AIR CLEAN

indication(22) flashes.

3. Wait for approx. 5seconds in order to save the setting.

ð Ventilation mode is selected.

ð The AIR CLEANindication (22) is illuminated.

Setting the timer

Using the timer function, the device can be switched off

automatically after a preset number of hours.

The number of hours can range from 1 to 24 and can be

adjusted in increments of 1h.

Note

Do not leave the operating device unattended in a

freely accessible room with an activated timer.

Automatic switch-off

ü The device is switched on.

1. Press the TIMER button(11).

ð The segment display(13) flashes.

2. Press the arrow buttons(12, 14) to set the desired number

of hours.

3. Wait for approx. 5seconds in order to save the setting.

ð The TIMERindication (24) is illuminated.

ð The relative room humidity is indicated in the segment

display(13) again.

ð The device switches off after the set period of time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TTK72E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TTK72E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info