Bedienungsanleitung Trotec TTR 500 D (Seite 6 von 20) (Englisch)

580091

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

User instructions – Adsorption dehumidiﬁer TTR 400/400D/500D

operation may only be performed by a trained electrician. If necessary,

please contact the Trotec customer service.

Air volume adjustment

The fan speeds can be adjusted at the speed controllers (7) and (8). Turn

the appropriate controller to the right to increase the air volume and to

the left to decrease it.

10. Transport and storage

Transport

Caution!

Damage to device due to vibrations.

Strong vibrations can cause damage to the device.

When transporting the device, protect it from exces-

sive shocks, e.g. by rough handling or dropping.

During transport, always secure the device against

slipping.

Lift and carry the device only by using the provided

means.

Storage

Store the device in a dry place where it is protected from adverse weather

effects.

Choose a storage location that is free of dust.

Always disconnect the device from the mains supply when it is not in use.

Up to 4 devices can be stacked in a space-saving way.

Always secure stacked devices against tipping.

11. Care and maintenance

Care

The housing surface of the device comes with a low-maintenance pow-

der coating. This decreases the adhesion of dirt and enables cleaning

with a damp piece of cloth.

Cleaning of the interior and the integrated components may only be car-

ried out by trained personnel or the Trotec customer service.

Caution!

Damage to the device due to improper cleaning.

The interior of the device must only be cleaned with

a damp cloth or pressurised air. Do not let any liquids

enter the device!

Maintenance

Trotec dehumidifiers are designed for long operating hours with low

maintenance requirements. To ensure safe operation of the device, all in-

tegrated components must be checked and cleaned or replaced at least

once every 6 months or 4,000 operating hours if necessary.

upstream of the fan. However, this leads to an unnecessary and often

considerable increase in noise and energy consumption.

This device is equipped with a variable-speed high performance fan

for each air stream to supply the nominal drying and regeneration air

flows at maximum speed with connected air hoses (each approx. 10m

long).

Additionally, the device features a heating unit generating heat by means

of ceramic PTC semiconductor components to heat the regeneration air.

These elements generate and keep a maximum surface temperature of

approx. 240 °C. The temperature-dependent resistance, which increases

quickly with decreasing heat distribution under a certain value (Curie

temperature), leads to a self-regulating effect of the heating power con-

sumption, i.e. in case of an increase in air temperature and/or decrease

in air volume, the power consumption decreases (and vice versa). Ad-

ditionally, destruction of the device by overheating, e.g. due to a lack in

regeneration air, can be excluded.

To achieve minimum humidity outlet at minimum drying air or maxi-

mum dehumidification performance at maximum drying air, it is cru-

cial to appropriately adjust the volume of regeneration air. The air volume

must be adjusted until the value defined as optimum heating flow is

displayed at the ampere meter.

For all other applications with low requirements placed on the dehumidi-

fication performance and drying air volume, the speed of the fan can be

reduced until the value defined as minimum heating flow is displayed

at the ampere meter. This way, very good dehumidification results can be

achieved at minimum energy consumption.

9. Operation

Switching the device on

The device can be switched on at the power switch (6). The integrated

control indicator will light up.

Switching the device off

The device can be switched off at the power switch (6). The integrated

control indicator will go out.

Remote operation

The device can be switched on at the power switch (6). The integrated

control indicator will light up.

Use the respective Tuchel plug (optional accessory) to connect an exter-

nal switch or control unit, e.g. hygrostat or timer, to the connection sock-

et. Please strictly follow the information in the attached circuit diagram!

If necessary, all electrical actuators can now be switched on or off by

means of the external switch. The control indicator on the power switch

keeps flashing irrespectively of the switching position and indicates that

the control system is activated.

In hygrostat operation, it may be necessary to provide air circulation at

the humidity detection position. In this case, the fan can be configured for

permanent operation by repositioning a plug at the integrated relay. This

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TTR 500 D Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TTR 500 D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info