Bedienungsanleitung Trotec TVE31T (Seite 7 von 10) (Englisch)

727941

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

EN 7

tower fan TVE 31 T / TVE 32 T

Night mode

In night mode, the device gradually changes the fan stage

automatically depending on the selected fan stage. You can set

the fan stage manually from 1 to 3 in this mode.

1. Press the MODE button(9) until the = night mode LED

lights up among the operating mode LEDs(16).

ð The device runs in night mode.

2. Press the fan stage button(10) to switch between the fan

stages.

ð The selected fan stage is indicated by the fan stage

indication(12).

ð After a few seconds, the display will be dimmed

automatically.

Setting the timer

Note

If the timer is activated, the device will no longer

display the current room temperature during operation.

The timer has one mode of operation:

• automatic switch-off upon expiry of a preset number of

hours

The number of hours of the timer can range from 1 to 12. The

timer can be set in increments of 1hour (1h to 12h).

The function can be set in all operating modes. It can only be

activated during operation.

Automatic switch-off

ü The device is switched on.

1. Press the TIMER button(8) to activate the timer.

ð The value 1 h appears on the temperature/timer

segment display(14).

2. Press the TIMER button(8) to select the desired number of

hours until automatic switch-off.

ð The temperature/timer segment display(14) indicates

the number of hours until automatic switch-off.

ð After the predefined time, the device switches itself off.

3. To delete the setting, press the TIMER button(8)

repeatedly until the temperature/timer segment

display(14) no longer indicates any value.

Memory function

If you switch the device back on from standby mode or after a

power failure, the settings selected for the last used operating

mode are saved.

Any activated timer will not be saved in the device.

Using the oscillation function

By means of the oscillation function you can achieve consistent

ventilation.

ü The device is switched on and operating.

1. Press the OSC button(7) to activate the oscillation

function.

ð The oscillation function is activated.

ð The fan body rotates to and fro by up to 60°.

2. Press the OSC button(7) to deactivate the oscillation

function.

ð The oscillation function is deactivated.

ð The device stops oscillation at the desired position and

continues to run in the selected operating mode.

Remote control

All settings of the device can also be made using the remote

control included in the scope of delivery.

SPEED

TIMER

POWER

OSC

MODE

No. Designation Meaning

17 Remote control

transmitter/

receiver

For infrared transmission to the

device

11 ON/OFF button Switching the device on and off

7 OSC button Activating and deactivating the

oscillation function

9 MODE button Selecting the operating mode:

normal operation

natural wind

night mode

8 TIMER button Timer function for automatic

switch-off

Setting the number of hours of the

activated timer

10 Fan stage button Setting the fan stage (1–3)

stage1 = low fan speed

stage2 = medium fan speed

stage3 = high fan speed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TVE31T Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TVE31T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info