Bedienungsanleitung Trotec TVE36T (Seite 7 von 10) (Englisch)

688846

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

EN 7

tower fan TVE 36 T

Night mode

In night mode, the device gradually changes the fan stage

automatically depending on the selected fan stage. You can set

the fan stage manually from 1 to 3 in this mode.

• When set to fan stage1 in night mode, the device keeps

running at the first stage of natural wind mode.

• When set to fan stage2 in night mode, the device keeps

running at the second stage of natural wind mode. After

30minutes the device automatically switches over to the

first stage of natural wind mode.

• When set to fan stage3, the device keeps running at the

third stage of natural wind mode. After 30minutes the

device automatically switches over to the second stage of

natural wind mode. After another 30minutes the device

automatically switches over to the first stage of natural

wind mode.

To activate night mode, please proceed as follows:

1. Press the MODE button(15) until the = night mode LED

lights up among the operating mode LEDs(13).

ð The device runs in night mode.

2. Press the fan stage button(14) to switch between the fan

stages.

ð The selected fan stage is indicated by the fan stage

indication(11).

Setting the timer

The timer has two modes of operation:

• automatic switch-off upon expiry of a preset number of

hours

• automatic switch-on upon expiry of a preset number of

hours

The number of hours can be set to 1h, 2h, 3h, 4h, 5h, 6h or

7h

The function can be set in all operating modes. It can be

activated both during operation and in standby mode.

Automatic switch-on

ü The device is switched off.

1. Press the TIMER button(9) until the desired number of

hours is displayed by the Hours LEDs(12).

ð The timer setting equals the desired number of hours.

ð The device switches on automatically after the set

number of hours has elapsed.

2. To delete the setting, press the TIMER button(9)

repeatedly until the Hours LEDs(12) no longer indicate any

value.

Automatic switch-off

ü The device is switched on.

1. Press the TIMER button(9) until the desired number of

hours is displayed by the Hours LEDs(12).

ð The timer setting equals the desired number of hours.

ð The device switches off automatically after the set

number of hours has elapsed.

2. To delete the setting, press the TIMER button(9)

repeatedly until the Hours LEDs(12) no longer indicate any

value.

Memory function

If you switch the device back on from standby mode or after a

power failure, the settings selected for the last used operating

mode are saved.

Any activated timer will not be saved in the device.

Using the oscillation function

By means of the oscillation function you can achieve consistent

ventilation.

ü The device is switched on and operating.

1. Press the OSCbutton(8) to activate the oscillation

function.

ð The oscillation function is activated.

ð The fan body rotates to and fro by up to 60°.

2. Press the OSCbutton(8) to deactivate the oscillation

function.

ð The oscillation function is deactivated.

ð The device stops oscillation at the desired position and

continues to run in the selected operating mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TVE36T Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TVE36T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info