Bedienungsanleitung Trotec TWP11025E (Seite 3 von 17) (Englisch)

756421

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

EN 3

submerged waste water pump TWP 4025 E / TWP 7025 E / TWP 11025 E

General safety

• Do not use the device in potentially explosive rooms or

areas and do not install it there.

• Do not use the device in aggressive atmosphere.

• Check accessories and connection parts for possible

damage prior to every use of the device. Do not use any

defective devices or device parts.

• Before carrying out maintenance, care or repair work on

the device, remove the mains plug from the mains socket.

Hold onto the mains plug while doing so.

• When positioning the device, observe the minimum

distances from walls and other objects as well as the

storage and operating conditions specified in the Technical

data chapter.

• Do not remove any safety signs, stickers or labels from the

device. Keep all safety signs, stickers and labels in legible

condition.

General safety warnings – Electrical safety

• The device is to be supplied with a rated residual current

of no more than 30mA by means of an RCD (Residual

Current protective Device).

• Ensure that all electric cables outside of the device are

protected from damage (e.g. caused by animals). Never

use the device if electric cables or the power connection

are damaged!

• The electrical connection must correspond to the

specifications in chapter Technical data.

• Insert the mains plug into a properly secured mains

socket.

• Switch the device off and disconnect the power cable from

the mains socket when the device is not in use.

• Do not under any circumstances use the device if you

detect damages on the mains plug or power cable.

If the connection line of this device is damaged, the device

must be sent for recycling in accordance with the

specifications provided in the Disposal chapter.

Defective power cables pose a serious health risk!

• Should there be a risk of flooding, install the plug

connections in a flood-proof area. There is a risk of

electric shock!

• Make sure that the mains voltage corresponds to the

specifications on the nameplate.

• Have all electrical installations carried out by an expert

according to the national regulations and the device-

specific requirements.

• Do not use the power cable to drag the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Protect the power supply cable against heat, oil and sharp

edges. Make sure that the power supply cable is not

crushed, kinked or subjected to other mechanical stresses.

• Only use splash-proof extension cables intended for

outdoor use whilst observing the device's power input.

Before using cable drums, always unroll the cable

completely. Check the cable for damage. The use of

extension cables which are not approved for outdoor use

can result in injuries due to electric shock.

• Before performing any work on the device, in case of leaks

in the water system, before taking work breaks or when

not in use, remove the mains plug from the mains socket.

General safety warnings – Personal safety

• Never use the device with persons or animals in the water

or pumping medium or if they could access it. There is a

risk of electric shock!

• Never insert any objects or limbs into the device.

• This appliance is not a toy! Keep away from children and

animals. Do not leave the device unattended during

operation.

Device-specific safety warnings for submerged

pumps

• Do not leave the device running unattended to ensure an

early detection of when the device runs dry or switches off

automatically. This would damage the device. Regularly

check the float for proper functioning.

• Please bear in mind, that the device is not suitable for

continuous operation (e.g. for watercourses in garden

ponds). Check the device for proper functioning on a

regular basis.

• Keep in mind, that lubricants are used within the device.

These might potentially cause damages or contaminations

if emitted. Do not use the device for drinking water or in

garden ponds with either a fish population or valuable

plants.

• The device is not to be carried by holding it at the power

supply cable or hose. Do not fasten it there either.

• Do not place any objects on the device – not even to

weight it down. The device will sink to the ground due to

its own weight.

• After the set-up of the device, its mains plug must be

readily accessible during operation.

• Wear sturdy shoes to protect yourself against electric

shock.

• Provide appropriate frost protection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec TWP11025E Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec TWP11025E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info