489385
14
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
14
Installation instructions
When selecting a location, please ensure that the FrostControl
is not installed in the vicinity of external heat sources (e.g.
power supplies) or in the immediate proximity of warm air
pipes.
The FrostControl must be installed in front of the boiler in the
cold water supply.
To operate the water supply, all pressure and submergible
pumps can be used at a pressure of up to 2.8 bar.
For the boiler, the FrostControl
replaces the manually operated
safety/drain valve ABO.
For the Trumatic C heating sys-
tem, the FrostControl replaces
the electrically operated safety/
drain valve ELASI.
To allow safe drainage of
the content of the boiler
if there is a risk of frost, an
automatic aeration valve must
be fitted to the warm water
supply of the boiler. Standard
for all warm water devices from
Truma.
Drain directly to the outside at a position protected against
splash water (apply splash guard, if necessary).
Before commencing any work, carefully read the operating
and installation instructions to familiarise yourself with the
product before installation.
The FrostControl heating element (accessory for Combi
heating systems) cannot be used for boilers and the
Trumatic C because they lack the required connection.
Installation instructions and installation place
5
2
3
1
4
1 Boiler
2 Automatic aeration valve
3 FrostControl (safety/drain valve)
4 Drain hose
5 Non-return valve (not included in delivery)
The FrostControl must be mounted on the floor close to the
boiler that is to be protected in a place that is easily accessible
to the user. Ensure that the rotary switch (1) and the push but-
ton (2) can still be operated.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

truma-frostcontrol

Suche zurücksetzen

  • Truma Frost Control Ablassventil max. 2,8 bar für John Guest/UniQuick 12mm

    Wo finde ich eine Bedienungsanleitung für dieses Ventil?

    MfG F. Schmidt Eingereicht am 14-4-2018 12:41

    Antworten Frage melden
  • Guten Tag,
    ich schreibe bereits das 2. mal leider ohne Antwort.
    Beim Frostcontroll läßt sich das Wasser nicht ausleeren, bis jetzt alles versucht, gibt es noch einen tipp ?

    mfg
    Walter Grabner Eingereicht am 23-9-2017 08:02

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Truma FrostControl wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info