Bedienungsanleitung TTulpe Indoor B-14 P50 Eco (Seite 9 von 12) (Englisch)

782454

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Function

The water heater is used for the production of instant hot water.

The removal of hot water can be preformed by multiple taps.

By turning on the relative tap, the main burner switches on heating

the water that passes.

These devices with a modiable ame are particularly suited for

usage with mechanical mixers and thermostats.

This water heater, in contrast with other water heaters with a xed

ame, has a modulation valve to optimise the water heaters opera-

tion. It allows for the water to be heated using less water pressure

and gas by modulating the ame according to the amount of water

used, maintaining the water extracted at a constant temperature.

The water heater uses automatic variation that is “PROPORTIO-

NAL”, able to change the gas consumption (modulating the ame)

to respond to the amount of water extracted.

This device is equipped with an electronic tool that is powered by

a 1.5 V battery that automatically switches on the pilot ame and

then the burner every time that hot water is extracted.

The ame is switched on using a card that ionizes the ame.

Model 6: for the extraction of 2 to 3 l/min the temperature of the

water supplied remains at 60°C, (in this case the has valve sup-

plies the burner with the necessary quantity of gas proportional to

the water supplied), above 3 l/min to 6 l/min the water temperature

varies from 60°C to 40°C.

Model 11: for the extraction of 2,5 to 5 l/min the temperature of

the water supplied remains at 60°C, (in this case the has valve

supplies the burner with the necessary quantity of gas proportional

to the water supplied), above 5 l/min to 11 l/min the water tempera-

ture varies from 60°C to 40°C.

Model 14: for the extraction of 2,5 to 7 l/min the temperature of

the water supplied remains at 60°C, (in this case the has valve

supplies the burner with the necessary quantity of gas proportional

to the water supplied), above 7 l/min to 14 l/min the water tempera-

ture varies from 60°C to 40°C.

Usage

Ensure that the gas tap and all water taps are switched off

- Turn on the Main gas supply tap or that of the gas tank if using

Liqueed Petroleum Gas (L.P.G.)

- Open the gas tap, not supplied with the device, placed immedia-

tely before the water heater on the gas input pipe

- Rotate knob A towards the large ame (ON ), during rotation,

when the small ame is reached it is necessary to press lightly

while turning until it reaches its destination.

- When hot water is requested, the device automatically turns on

the pilot ame, this lights the main burner.

- When the hot water request has terminated (turning the water

tap off) the burner automatically switches off, the device then

awaits another heating request.

If after 60 seconds it does not switch on, the ame detector inter-

rupts the ow of gas and blocks the device.

To reuse the device after it has been blocked, close the hot water

extraction tap and then reopen it to restart the sequence.

If the main burner accidentally switches off, the device will attempt

to turn it on again.

If within 60 seconds the device does not function it is blocked.

The device is built to function with normal water pressure; in addi-

tion a temperature selector B is also supplied.

Rotate the knob completely to the left to obtain the maximum water

output or completely to the right for the minimum water output.

The machine is switched off by rotating knob A to the ( OFF) po-

sition.

When the water heater is not used for long periods close the gas

supply tap or the LPG gas valve on the tank.

For the best operational results it is recommended to have a quali-

ed technician service the machine at least once a year.

Gas economizer

The device is equipped with a gas economizing device which is

used to choose the temperature of the water so it may be supplied

at the temperature necessary while saving gas.

The economizing device is activated by turning the knob A until it

reaches the picture of the small ame (MIN ). Using the economi-

zer limits the amount of heating when the hot water usage is mo-

dest (water supplied is already warm or there is a reduced usage,

for example in summer).

DANGER OF FREEZING

If there is a possibility that the area where the device is stalled could

reach below 0°C, the device must be emptied of all water contained.

In case of freezing conditions disconnect the incoming water pipe

to drain the water heater completely.

Fig. 17

A = Gas economizer on/off

•off position

minimum gas level

maximum gas level

B = Water temperature selector

OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TTulpe Indoor B-14 P50 Eco Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TTulpe Indoor B-14 P50 Eco

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info