Bedienungsanleitung Tunturi FitCycle 30 (Seite 15 von 48) (Deutsch, Englisch, Holländisch, Französisch)

738068

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English

warm up and cool down phases, but towards the end

of the exercise phase you should increase resistance

making your legs work harder. You will have to reduce

your speed to keep your heart rate in the target zone.

Weight loss

The important factor here is the amount of effort you

put in. The harder and longer you work the more

calories you will burn. Effectively this is the same as if

you were training to improve your fitness, the difference

is the goal.

Heart rate

Pulse rate measurement

(hand pulse sensors)

The pulse rate is measured by sensors in the handlebars

when the user is touching both sensors at the same

time. Accurate pulse measurement requires that the

skin is slightly moist and constantly touching the hand

pulse sensors. If the skin is too dry or too moist, the

pulse rate measurement will become less accurate.

NOTE

• Do not use the hand pulse sensors in

combination with a heart rate chest belt.

• If you set a heart rate limit for your workout, an

Maximum heart rate

(during training)

The maximum heart rate is the highest heart rate a

person can safely achieve through exercise stress. The

following formula is used to calculate the average

maximum heart rate: 220 - AGE. The maximum heart

rate varies from person to person.

WARNING

• Make sure that you do not exceed your

maximum heart rate during your workout. If you

belong to a risk group, consult a physician.

Beginner

50-60% of maximum heart rate

Suitable for beginners, weight-watchers, convalescents

and persons who have not exercised for a long time.

Exercise at least three times a week, 30 minutes at a

time.

Advanced

60-70% of maximum heart rate

Suitable for persons who want to improve and maintain

fitness. Exercise at least three times a week, 30 minutes

at a time.

Expert

70-80% of maximum heart rate

Suitable for the fittest of persons who are used to long-

endurance workouts.

Use

Adjusting the support feet

The equipment is equipped with 2 support feet. If

the equipment is not stable, the support feet can be

adjusted.

- Turn the support feet as required to put the

equipment in a stable position.

Adjusting the vertical seat position

The vertical seat position can be adjusted by setting the

seat tube to the required position. With the leg almost

straight, the arch of the foot must touch the pedal at its

lowermost point.

- Loosen the seat tube adjustment knob.

- Move the seat tube to the required position.

- Tighten the seat tube adjustment knob.

Adjusting resistance

To increase or decrease resistance, turn the adjustment

knob at the top of the handlebar support tube

- Clockwise (+ direction) to increase resistance.

- Counter-clockwise (- direction) to decrease

resistance.

The scale above the knob (1-8) helps you find and reset

a suitable resistance.

Replacing the batteries

The console is equipped with 2 AA batteries at the rear

of the console.

- Remove the cover.

- Remove the old batteries.

- Insert the new batteries. Make sure that batteries

match the (+) and (-) polarity markings.

- Mount the cover.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tunturi FitCycle 30 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info