Bedienungsanleitung Tunturi Platinum Cross Sprinter (Seite 3 von 76) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

548095

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Cross sprinter

Operation

• Power the console on by pressing any key.

• Enter Quick start operation by simply pressing the

start key. The time will count up from zero.

• You may set a workout time by using the Time up

and down keys. When you press the Start key the

time will count down to zero from the set time. After

pressing start you can use the up and down keys to

switch the time to count up or count down.

• Press the start/stop button to Pause the timer and also

to resume the timer when it is in Pause mode.

• Press the Reset key to reset all the data.

• For Heart Rate readings you must wear a heart rate

transmitter. The console will pick up the transmitter

signal and display your heart rate automatically.

Console

The power for the console is provided by 3 AA alkaline

batteries (provided) and will operate on rechargeable

NiCd AA batteries. Once the batteries are installed the

console will power on, the Time window will display the

total usage time, the Distance window will display the

total usage distance reading and the RPM window will

display the software version. The usage time shows how

long the elliptical has been in use and the distance shows

how many virtual miles the elliptical has gone.

If the console does not detect a speed signal, or key

activations, it will go to sleep to protect battery life. To

wake the console up you can press any key.

Function keys

1. Start/Stop: Starts and stops the program timer.

2. Time - (Down): Used to set workout time before the

start key is pressed. The down key will decrease the

time setting by 1 minute for each key press. The time

will change more rapidly when the key is held down

for 2 seconds. The key is also used to switch the time

reading to count down (remaining time).

3. Reset: Performs a complete reset of the console.

4. Time + (up): Used to set workout time before the start

key is pressed. The up key will increase the time

setting by 1 minute for each key press. The time will

change more rapidly when the key is held down for

2 seconds. The key is also used to switch the time

reading to count up (elapsed time).

Display

5. Time: Displays workout time two ways; either count

up (accumulated time) or count down (remaining

time), depending on your preference selected before

starting the timer.

6. RPM: Displays the current pedaling speed as Revoluti-

ons Per Minute.

7. Distance: Displays virtual distance traveled in miles

or kilometers (units selected through Management

Mode, see page 9 for details).

8. Heart Rate: Displays heart rate in beats per minute

when a heart rate chest belt transmitter is worn and

detected by the console. The heart rate receiver is

compatible with Polar coded transmitters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tunturi Platinum Cross Sprinter Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info