Bedienungsanleitung Tunturi Platinum Treadmill (Seite 3 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Finnisch)

548100

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Treadmill

Treadmills need constant lubrication. After not using the

machine for a while, the deck could dry out and needs

to be lubricated. Make sure you check after long periods

if the belt needs lubrication. Check the lubrication section

on page 8.

Important Electrical

Information

NEVER use a RCD - Residual Current Device (U.S. ver.=

GFCI) - wall outlet with this treadmill. As with any ap-

pliance with a large motor, the RCD/GFCI will trip often.

Route the power mains cord away from any moving part

of the treadmill including the elevation mechanism and

transport wheels.

NEVER remove any cover without ﬁ rst disconnecting AC

power. If voltage varies by ten percent (10%) or more,

the performance of your treadmill may be affected. Such

conditions are not covered under your warranty. If you

suspect the voltage is low, contact your local power

company or a licensed electrician for proper testing.

NEVER expose this treadmill to rain or moisture. This

product is NOT designed for use outdoors, near a pool

or spa, or in any other high humidity environment. The

temperature speciﬁ cation is 40 degrees c, and humidity

is 95%, non-condensing (no water drops forming on

surfaces).

Circuit breakers: Some circuit breakers used in homes are

not rated for high inrush currents that can occur when a

treadmill is ﬁ rst turned on or even during normal use. If

your treadmill is tripping the circuit breaker (even though

it is the proper current rating and the treadmill is the only

appliance on the circuit) but the circuit breaker on the

treadmill itself does not trip, you will need to replace the

breaker with a high inrush type. This is not a warranty

defect. This is a condition we as a manufacture have no

ability to control. This part is available through most electri-

cal supply stores

Grounding Instructions

This product must be grounded. If the treadmill’s electrical

system should malfunction or breakdown grounding provi-

des a path of least resistance for electric current, reducing

the risk of electric shock. This product is equipped with a

cord having an equipment-grounding plug. The plug must

be plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local codes

and ordinances.

Improper connection of the equipment-grounding con-

ductor can result in a risk of electric shock. Check with

a qualiﬁ ed electrician or serviceman if you are in doubt

as to whether the product is properly grounded. Do not

modify the plug provided with the product if it will not ﬁ t

the outlet; have a proper outlet installed by a qualiﬁ ed

electrician.

Important Operation

Instructions

• NEVER operate this treadmill without reading and

completely understanding the results of any operational

change you request from the computer.

• Understand that changes in speed and incline do

not occur immediately. Set your desired speed on the

computer console and release the adjustment key. The

computer will obey the command gradually.

• NEVER use your treadmill during an electrical storm.

Surges may occur in your household power supply that

could damage treadmill components.

• Use caution while participating in other activities while

walking on your treadmill; such as watching television,

reading, etc. These distractions may cause you to lose

balance or stray from walking in the center of the belt;

which may result in serious injury.

• NEVER mount or dismount the treadmill while the

belt is moving. The treadmills start with at a very low

speed and it is unnecessary to straddle the belt during

start up. Simply standing on the belt during slow ac-

celeration is proper after you have learned to operate

the unit.

• Always hold on to a handrail or hand bar while ma-

king control changes (incline, speed, etc.).

Do not use excessive pressure on console control keys.

They are precision set to function properly with little ﬁ nger

pressure. Pushing harder is not going to make the unit go

faster or slower. If you feel the buttons are not functioning

properly with normal pressure contact your dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tunturi Platinum Treadmill Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info