Bedienungsanleitung Tunturi T85 Treadmill - 2020 (Seite 23 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

736479

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

English

Fitness test

Use “Speed & Incline + / - “ buttons to navigate in main menu and

select “Fitness Test“

- Press “Enter/ Start” to confirm and enter the program selection

screen.

‼ NOTE

• To start a fitness test a user selection is required.

If no user is selected this will be notified in the console.

• The fitness test results will be stored in the “User log” file.

- Press “Enter/ Start” to confirm and start the 3 seconds countdown

to start the “Fitness test”

During workout mode

- To complete the fitness test you should run for the duration of 12

minutes.

- In these 12 minutes you are in control to use “Speed control” keys

to adjust the speed to push your limits, as the further you run, the

better you score will be.

- Heart rate detection is required to calculate your fitness test results.

End the “Fitness test”

- The test will be completed automatically after 12 minutes, and

display will show the “Last session” information. Showing a

summary of your workout.

- The “Fitness test” specific test results will be stored in the “User

log” file.

‼ NOTE

• When test is aborted before the end time of 12 minutes, the

test will fail.

• Display will prompt the user if there is no heart rate signal

detected.

T-Road

Use “Speed & Incline + / - “ buttons to navigate in main menu and

select “T-Road“

- Press “Enter/ Start” to confirm and enter the program selection

screen.

- Use “Speed & Incline + / - “ buttons to select one of the 3

available T-road profiles.

- Press “Enter/ Start” to confirm and start the 3 seconds countdown

to start the selected “T-road” profile.

During workout mode

- For T-road profiles the goal duration is fixed based on the distance

of the profile selected.

- Incline settings behaviour is based on the selected profile, so

adjusting the incline setting is possible, but will auto correct close

to immediately again.

- Use “Speed control” keys to adjust the speed setting to your

requirements at any time.

- Use “Enter/ Start” button to switch between movie and profile

display.

Movie display: Showing the suggestive track, in where the movie

speed is related to the running speed, and the environment

inclination is related to the treadmills incline setting.

Profile display: Is showing the actual profile in parameters.

To “Pause/ end your workout” see commencing section in this

manual.

Bluetooth mode

‼ NOTE

• This console can connect with an APP on a smart device by

Bluetooth (iOS & Android).

• Establish the Bluetooth connection only via the connection

mode on the installed APP on your smart device.

Use “Speed & Incline + / - “ buttons to navigate in main menu and

select “Bluetooth mode“

- Press “Enter/ Start” to confirm and enter the program selection

screen, and switch BT module in on mode.

BT address will be displayed.

- Press “Start/ Stop” button to exit the BT connection mode display

and switch BT module off again if not paired.

‼ NOTE

• Tunturi only provides the option to connect your fintess console

throughout a bluetooth connection. Therefore Tunturi cannot be

held resposible for damage, or malfunctioning of products other

than Tunturi products.

• Check the website for extra information. www.Tunturi.com

User

Press “User/ + (scale up)” button to enter the User menu.

- Use “Speed & Incline + / - “ buttons to select one of the 6

available User sub-menu’s.

- Press “Enter/ Start” to confirm and enter the selected sub menu.

User Log

User log will open by showing your “Latest Session” workout data.

- Press “Enter/ Start” to the totals of your personal user data.

- Press “Enter/ Start” to exit the “User Log” menu.

User Setting

In “User setting” menu you can set your personal preferences, and

see some valuable data. :

- Adjust “Contrast”: The brightness (Default=50%)

- View “Total Distance”: The total distance of the machine.

- View “Total Time”: The total operation time of the machine. .

- View “Current Version”: The current installed software.

- Adust “SW Upgrade”: Software update mode.

Yes: Can update software by USB. No: Can’t update SW by USB.

- Adjust “Language”: The language setting illustrated with a flag.

- Adjust “Volume Control”: The button beep sound setting.

on(yes) or off (NO). Some sound notifications cannot be set off.

Adjust setting

- Use “Speed & Incline + / - “ buttons to select one of the adjustable

menu parameters.

- Press “Enter/ Start” to confirm and enter the editing mode.

- Use “Speed & Incline + / - “ buttons to adjust the parameter.

- Press “Enter/ Start” to confirm.

- Press “Back/ Stop” to exit the “User Setting” menu. .

User Setting

In “User setting” menu you can change the User Settings parameters

if they are not ( longer ) correct.

See section “Create User” to see how to adjust and store the user

setting parameters.

- Press “Back/ Stop” to exit the “User Setting” menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tunturi T85 Treadmill - 2020 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info