Bedienungsanleitung Turbionaire Revigo 14 (Seite 7 von 60) (Englisch, Französisch, Italienisch)

804680

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

General work area - All maintenance staff and others working in the local area shall be

instructed on the nature of work being carried out. Work in confined spaces shall be

avoided. The area around the work space shall be sectioned off. Ensure that the

conditions within the area have been made safe by control of flammable material.

Checking for presence of refrigerant - The area shall be checked with an appropriate

refrigerant detector prior to and during work, to ensure the technician is aware of

potentially flammable atmospheres. Ensure that the leak detection equipment being

used is suitable for use with flammable refrigerants, i.e. no sparking, adequately sealed

or intrinsically safe.

Presence of fire extinguisher - If any hot work is to be conducted on the refrigeration

equipment or any associated parts, appropriate fire extinguishing equipment shall be

available to hand. Have a dry powder or CO2 fire extinguisher adjacent to the charging

area.

No ignition sources - No person carrying out work in relation to a refrigeration system

which involves exposing any pipe work that contains or has contained flammable

refrigerant shall use any sources of ignition in such a manner that it may lead to the risk

of fire or explosion. All possible ignition sources, including cigarette smoking, should be

kept sufficiently far away from the site of installation, repairing, removing and disposal,

during which flammable refrigerant can possibly be released to the surrounding space.

Prior to work taking place, the area around the equipment is to be surveyed to make sure

that there are no flammable hazards or ignition risks. “No Smoking” signs shall be

displayed.

Ventilated area - Ensure that the area is in the open or that it is adequately ventilated

before breaking into the system or conducting any hot work. A degree of ventilation shall

continue during the period that the work is carried out. The ventilation should safely

disperse any released refrigerant and preferably expel it externally into the atmosphere.

Checks to the refrigeration equipment - Where electrical components are being

changed, they shall be fit for the purpose and to the correct specification. At all times the

manufacturer’s maintenance and service guidelines shall be followed. If in doubt consult

the manufacturer’s technical department for assistance.

The following checks shall be applied to installations using flammable refrigerants:

– The charge size is in accordance with the room size within which the refrigerant

containing parts are installed;

– The ventilation machinery and outlets are operating adequately and are not

obstructed;

– If an indirect refrigerating circuit is being used, the secondary circuit shall be checked

for the presence of refrigerant;

– Marking to the equipment continues to be visible and legible. Markings and signs that

are illegible shall be corrected;

– refrigeration pipe or components are installed in a position where they are unlikely to

be exposed to any substance which may corrode refrigerant containing components,

unless the components are constructed of materials which are inherently resistant to

being corroded or are suitably protected against being so corroded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Turbionaire Revigo 14 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info