EN
Unit speed increase button
LED illuminated On/Off button
Unit on/off button
Button to reduce the speed of the unit
4. Remove the grease filter. To prevent damage, do not bend the grease filter.
5. Disconnect the control panel harness and the lighting system harness.
6. Loosen the screws from the built-in furniture.
7. Slowly lower the unit.
6. USE AND FUNCTIONS
ATTENTION! LED lamps must not be covered with thermal insulation or other materials.
NOTE! Only turn on the LED lights while the hood is running. Do not turn on the lights to
illuminate the room. Do not touch the LED lamps within 30 minutes after use
units.
Via the operating elements you set all the functions of your unit and receive information
about the operating status.
6.1 Actuation elements
Gesture
sensor
Display
screen
Gesture
sensor
Digital display- Speed display
Press the and keys simultaneously for 1 second. The following are activated: the
flashing display and the automatic shutdown of the unit after 5 minutes. After 5 minutes, the
engine will stop and, if no other function is activated, a sound signal will be heard for 5
seconds. During the operation of the sound signal, it can be stopped by pressing any button.
You can deactivate the Quick Timer function by simultaneously pressing the and keys
again
Press and hold the key to activate Boost level, the unit will operate at maximum level for
5 minutes. After 5 minutes a warning beep will sound and the speed will immediately return
to level 3.
6.3 Boost speed setting
Touch the key to increase the fan speed.
6.2 Setting the speed using the control panel
Touch the key to decrease the fan speed.
The digital display can show depending on the set speed:
1 - for the first speed step of the fan
2 - for the second fan speed level
3 - for the third speed step of the fan
6.4 Quick Timer function
24
