SPECIAL SAFETY INSTRUCTIONS FOR YOUR
CYCLE CLEANER
Keep the device away from heaters, fire, flames, and cigarettes. If the air intake
opening is blocked or the suction pipe or a nozzle or brush is blocked, you must
switch the vacuum cleaner off immediately with the ON / OFF button.
Remove the reason for the blockage before you switch the device on again. Do not
vacuum up large or pointed objects. Therefore, you should remove these objects
from the floor before vacuuming. Do not vacuum any flammable or burning/ glowing
substances (e.g. cigarette ends) or liquids.
Only operate the vacuum cleaner with the correctly installed cyclone insert and
HEPA filter.
Empty the dust container regularly.
Charge the battery every 3 months, even if the device has not been put into operation,
to protect against deep discharge (see note "Periodic charging of the battery").
INSTALL THE WALL SUSPENSION
1. Screw the wall bracket (17) with the screws at a
suitable height on the wall. It should be installed near
an electrical outlet.
2. The device's suspension device is located on the rear of
the motor handle.
3. Hang the cyclone suction device on the hanging device
on the wall mounting.
