Bedienungsanleitung Turtle Beach Earforce X42 (Seite 18 von 28) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

541079

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Headset

· 50mm diameter speakers with neodymium magnets

· Game audio frequency response: 20 Hz - 20 kHz, >120 dB SPL @ 1 kHz

· Condenser microphone frequency response: 50 Hz - 15 kHz

Game audio Dual Band WiFi Digital 2.4 GHz/5.8 GHz RF wireless

· Headphone amplier: Stereo 27 mW/ch, THD <1%

· Operates on (2) AAA batteries or (2) AAA rechargeable NiMH batteries

· Automatic shut down after approx 5 minutes of carrier loss or audio

silence to conserve battery power

· Battery booster circuit extends battery life for up to 15 hours

Transmitter

· Dual Band Digital

WiFi Digital 2.4 GHz/5.8 GHz wireless

transmission with up to 30 foot range

· Frequency response: 20 Hz - 20 kHz

· Optical TOSLINK digital audio input compatible with 48 kHz digital

audio stream

· Optical TOSLINK digital audio output pass-through of digital

input stream

· Stereo 3.5 mm analog input jack

· Maximum analog input level: 2 Vpp (700 mV rms)

· USB Power – (5 V DC @ 350 mA max)

Technical Speciﬁcations

Troubleshooting

No sound

• Check that the headset volume control is turned up.

• Check that the transmitter power and optical cables are properly connected.

• Check that the headset is powered on. The LED on the left ear cup should be ashing.

• Check if the Power LED on the transmitter is on solid. If the LED is slowly pulsing, it indicates that the transmitter isn’t

communicating with the headset. If the headset is on solid and the transmitter LED is slowly pulsing, then the headset and transmitter need

to be “paired” as described in the section “Pairing the Headset and Transmitter” (see pg 4).

Audio Drops, Popping or Clicking Sounds

Audio dropouts, popping or clicking sounds on the headset are caused by poor reception. This can occur when:

• The headset and transmitter are out of range. For best performance, move within 20 feet from the transmitter.

• There’s a wall or other large object between the headset and transmitter.

• The transmitter is in a bad location that is interfering with the antenna.

• A wireless base station or wireless LAN are causing a lot of RF activity that’s blocking the RF signal from the transmitter. The transmitter

should be moved at least 5 feet away from a wireless router or gaming console.

Voice Chat Drops

• Most in-game voice chat drops are simply caused by network performance or “lag”. Usually they subside after a few moments so please

be patient. In extreme cases, you may have to leave a game and return to reset the chat function.

• If you use a wireless internet connection, low signal strength from your modem/router can make the voice chat malfunction.

A wired connection from your modem/router to your console is recommended for best results.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Turtle Beach Earforce X42 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Turtle Beach Earforce X42

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info