553478
11
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
guaranteecard
SWISS made
canteen tonneau
Go LIatH tecH PILot
WWW.TWSTEEL.COM
CEO_SWISS_Cover_Garantiebewijs.indd 1 02-11-11 09:50
CEO Canteen
5
CEO Tonneau
10
CEO Goliath
13
CEO Tech
15
CEO Pilot
16
5
TW STeel – CeO
TW Steel is a watch brand harmoniously combining both design
and innovation. ‘The Watch in Steel’ leads the oversized market
with style and quality guaranteed.
TW Steel values the most important relationship of all – the one
with the consumer. To express this, we hereby give you all the
information that you need to enjoy your TW Steel CEO watch to
the fullest.
CeO CanTeen
The ChrOnOgraph mOdelS
hOur hand
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
SeCOnd hand
daTe
buTTOn a
minuTe hand
24-hOur hand
CrOWn Cap / nOrmal
CrOWn pOSiTiOn
buTTOn b
(0) pOSiTiOn
5
TW STeel – CeO
TW Steel is a watch brand harmoniously combining both design
and innovation. ‘The Watch in Steel’ leads the oversized market
with style and quality guaranteed.
TW Steel values the most important relationship of all – the one
with the consumer. To express this, we hereby give you all the
information that you need to enjoy your TW Steel CEO watch to
the fullest.
CeO CanTeen
The ChrOnOgraph mOdelS
hOur hand
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
SeCOnd hand
daTe
buTTOn a
minuTe hand
24-hOur hand
CrOWn Cap / nOrmal
CrOWn pOSiTiOn
buTTOn b
(0) pOSiTiOn
6
7
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown cap by turning
it anti-clockwise. Once you have
unscrewed it, you will see the
(small) crown. Follow the instruc-
tions below to adjust the time and date. After adjusting them,
screw the crown cap back by turning it clockwise.
adjuSTing The Time
Pull out the crown to the 2nd position so
that the second hand stops at the (0)
position. Turn the crown to set the hour
and minute hands.
adjuSTing The daTe
Pull out the crown to the 1st position. Turn the
crown anti-clockwise to set the date. After the
date has been set, push the crown back to its
normal position.
uSing The ChrOnOgraph
The chronograph is able to measure and display the time ac-
curately to 1/20th of a second, up to a maximum of 59 minutes
and 59 seconds. The retrograde chronograph 1/20 second hand
keeps running continuously for 30 seconds after starting and then
stops at the (0) position. Press button B to change the watch to
the chronograph mode. The second hand stops at the (0) position
and changes to the chronograph 1/20 second hand.
The chronograph can be started and stopped at any time by
pressing button A.
Pressing button B resets the chronograph. All hands will then
return to their (0) position. The chronograph second hand can be
restarted by pressing button B once again.
If the chronograph second hand and the chronograph 1/20 se-
cond hand do not return to the (0) position after the chronograph
has been reset or after the battery has been replaced, you should
do the following. Pull out the crown to the 2nd position. Press but-
ton A to set the chronograph second hand to the (0) position.
Press button B to set the chronograph 1/20 second hand to the
(0) position. The chronograph second hands can be advanced
rapidly by continuously pressing button A or B. Once the hands
have returned to the (0) position, return the crown to its normal
position and screw the crown cap clockwise back to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
6
7
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown cap by turning
it anti-clockwise. Once you have
unscrewed it, you will see the
(small) crown. Follow the instruc-
tions below to adjust the time and date. After adjusting them,
screw the crown cap back by turning it clockwise.
adjuSTing The Time
Pull out the crown to the 2nd position so
that the second hand stops at the (0)
position. Turn the crown to set the hour
and minute hands.
adjuSTing The daTe
Pull out the crown to the 1st position. Turn the
crown anti-clockwise to set the date. After the
date has been set, push the crown back to its
normal position.
uSing The ChrOnOgraph
The chronograph is able to measure and display the time ac-
curately to 1/20th of a second, up to a maximum of 59 minutes
and 59 seconds. The retrograde chronograph 1/20 second hand
keeps running continuously for 30 seconds after starting and then
stops at the (0) position. Press button B to change the watch to
the chronograph mode. The second hand stops at the (0) position
and changes to the chronograph 1/20 second hand.
The chronograph can be started and stopped at any time by
pressing button A.
Pressing button B resets the chronograph. All hands will then
return to their (0) position. The chronograph second hand can be
restarted by pressing button B once again.
If the chronograph second hand and the chronograph 1/20 se-
cond hand do not return to the (0) position after the chronograph
has been reset or after the battery has been replaced, you should
do the following. Pull out the crown to the 2nd position. Press but-
ton A to set the chronograph second hand to the (0) position.
Press button B to set the chronograph 1/20 second hand to the
(0) position. The chronograph second hands can be advanced
rapidly by continuously pressing button A or B. Once the hands
have returned to the (0) position, return the crown to its normal
position and screw the crown cap clockwise back to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
8
9
The 3-hand mOdelS
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown cap by turning it
anti-clockwise. Once you have un-
screwed it, you will see the (small)
crown. Follow the instructions
below to adjust the time and date. After adjusting them, screw
the crown cap back by turning it clockwise.
adjuSTing The Time
Pull out the crown to the 2nd position.
Turn the crown to set the hour and
minute hands.
adjuSTing The daTe
*
Pull out the crown to the 1st position.
Turn the crown anti-clockwise to
set the date.
adjuSTing The day
**
Pull out the crown to the 1st position.
Turn the crown clockwise to adjust the day.
The days can be displayed in English or
Spanish.
Once the date and/or day has been set, push the crown back
to its normal position and screw the crown cap clockwise back
to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
* For the Swiss Made diamond model, the crown must be turned
clockwise in order to set the date.
** The Swiss Made CEO Canteen models feature a Swiss move-
ment without day display.
minuTe hand
CrOWn Cap / nOrmal
CrOWn pOSiTiOn
hOur hand
SeCOnd hand
day/daTe
(0) pOSiTiOn
8
9
The 3-hand mOdelS
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown cap by turning it
anti-clockwise. Once you have un-
screwed it, you will see the (small)
crown. Follow the instructions
below to adjust the time and date. After adjusting them, screw
the crown cap back by turning it clockwise.
adjuSTing The Time
Pull out the crown to the 2nd position.
Turn the crown to set the hour and
minute hands.
adjuSTing The daTe
*
Pull out the crown to the 1st position.
Turn the crown anti-clockwise to
set the date.
adjuSTing The day
**
Pull out the crown to the 1st position.
Turn the crown clockwise to adjust the day.
The days can be displayed in English or
Spanish.
Once the date and/or day has been set, push the crown back
to its normal position and screw the crown cap clockwise back
to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
* For the Swiss Made diamond model, the crown must be turned
clockwise in order to set the date.
** The Swiss Made CEO Canteen models feature a Swiss move-
ment without day display.
minuTe hand
CrOWn Cap / nOrmal
CrOWn pOSiTiOn
hOur hand
SeCOnd hand
day/daTe
(0) pOSiTiOn
10
11
CeO TOnneau
The ChrOnOgraph mOdelS
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown by turning it anti-
clockwise. Then follow the instructions
for adjusting the date and time and
using the chronograph on the CEO
Canteen Style chronograph models.
Once you have set the date or time or adjusted the chronograph
second hand, push the crown back to its normal position and
screw the crown clockwise back to the case.
The SWiSS made mOdelS feaTuring a SWiSS
ChrOnOgraph mOvemenT
hOW TO OperaTe The CrOWn
To set the time or date, you must rst unscrew the crown by
turning it anticlockwise.
SeTTing The Time
Pull out the crown to the 2nd position so that the second hand
stops in the (0) position. Turn the crown to set the hour and
minute hands.
SeTTing The daTe
Pull out the crown to the 1st position. Next, turn the crown
anticlockwise to set the date.
Once you have set the date, push the crown back to its normal
position and screw the crown clockwise back to the case.
uSing The ChrOnOgraph
The chronograph can measure and display the time accurately
to 1/10th of a second, up to a maximum of 30 minutes.
You can use button A to activate and deactivate the chronograph
at any time.
If you have stopped the time using button A, you can then reset
the chronograph with button B — all hands will then return to
the (0) position.
The chronograph also has an interval-timing function.
buTTOn a
minuTe hand
24-hOur hand
CrOWn / nOrmal
CrOWn pOSiTiOn
buTTOn b
hOur hand
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
SeCOnd hand
daTe
(0) pOSiTiOn
10
11
CeO TOnneau
The ChrOnOgraph mOdelS
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown by turning it anti-
clockwise. Then follow the instructions
for adjusting the date and time and
using the chronograph on the CEO
Canteen Style chronograph models.
Once you have set the date or time or adjusted the chronograph
second hand, push the crown back to its normal position and
screw the crown clockwise back to the case.
The SWiSS made mOdelS feaTuring a SWiSS
ChrOnOgraph mOvemenT
hOW TO OperaTe The CrOWn
To set the time or date, you must rst unscrew the crown by
turning it anticlockwise.
SeTTing The Time
Pull out the crown to the 2nd position so that the second hand
stops in the (0) position. Turn the crown to set the hour and
minute hands.
SeTTing The daTe
Pull out the crown to the 1st position. Next, turn the crown
anticlockwise to set the date.
Once you have set the date, push the crown back to its normal
position and screw the crown clockwise back to the case.
uSing The ChrOnOgraph
The chronograph can measure and display the time accurately
to 1/10th of a second, up to a maximum of 30 minutes.
You can use button A to activate and deactivate the chronograph
at any time.
If you have stopped the time using button A, you can then reset
the chronograph with button B — all hands will then return to
the (0) position.
The chronograph also has an interval-timing function.
buTTOn a
minuTe hand
24-hOur hand
CrOWn / nOrmal
CrOWn pOSiTiOn
buTTOn b
hOur hand
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
SeCOnd hand
daTe
(0) pOSiTiOn
12
13
hOW TO uSe The inTerval-Timing funCTiOn
You can activate the chronograph using button A. If you wish
to temporarily stop the time, press button B. The time has now
been deactivated but continues to run in the background. If you
would like to continue using the stopwatch function, press button
B again – the hands will now display the correct time, which was
running in the background all along. You can repeat this action
as often as necessary. Press button A to stop the time – the nal
time will now be displayed.
If you press button B next, the chronograph will be reset and all
hands will return to the (0) position.
If the hands of the chronograph do not return to the (0) position
after you have reset the chronograph or replaced the battery,
please complete the following steps: pull out the crown to the
2nd position. Press buttons A and B simultaneously for at least
2 seconds – this will activate the corrective mode. You can now
adjust the hands. Use button A to adjust the large second hand
(1), the 1/10th second hand (2) and the minute hand (3). You
can use button B to select one of these hands. Once the hands
have returned to the (0) position, push the crown back to its
normal position and screw the crown clockwise back to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
CeO gOliaTh
The ChrOnOgraph mOdelS
uSe Of The CrOWn
To adjust the time or set the date, pull
out the crown to the 1st or 2nd position.
Then follow the instructions for adjusting
the date and time on the CEO Canteen
Style chronograph models.
After the date or time has been set,
push the crown back to its normal position.
uSing The ChrOnOgraph
The chronograph is able to measure and display the time
accurately to 1/1 of a second, up to a maximum of 59 minutes
and 59 seconds.
(0) pOSiTiOn
buTTOn a
minuTe hand
24-hOur hand
CrOWn / nOrmal
CrOWn pOSiTiOn
buTTOn b
hOur hand
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
daTe
12
13
hOW TO uSe The inTerval-Timing funCTiOn
You can activate the chronograph using button A. If you wish
to temporarily stop the time, press button B. The time has now
been deactivated but continues to run in the background. If you
would like to continue using the stopwatch function, press button
B again – the hands will now display the correct time, which was
running in the background all along. You can repeat this action
as often as necessary. Press button A to stop the time – the nal
time will now be displayed.
If you press button B next, the chronograph will be reset and all
hands will return to the (0) position.
If the hands of the chronograph do not return to the (0) position
after you have reset the chronograph or replaced the battery,
please complete the following steps: pull out the crown to the
2nd position. Press buttons A and B simultaneously for at least
2 seconds – this will activate the corrective mode. You can now
adjust the hands. Use button A to adjust the large second hand
(1), the 1/10th second hand (2) and the minute hand (3). You
can use button B to select one of these hands. Once the hands
have returned to the (0) position, push the crown back to its
normal position and screw the crown clockwise back to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
CeO gOliaTh
The ChrOnOgraph mOdelS
uSe Of The CrOWn
To adjust the time or set the date, pull
out the crown to the 1st or 2nd position.
Then follow the instructions for adjusting
the date and time on the CEO Canteen
Style chronograph models.
After the date or time has been set,
push the crown back to its normal position.
uSing The ChrOnOgraph
The chronograph is able to measure and display the time
accurately to 1/1 of a second, up to a maximum of 59 minutes
and 59 seconds.
(0) pOSiTiOn
buTTOn a
minuTe hand
24-hOur hand
CrOWn / nOrmal
CrOWn pOSiTiOn
buTTOn b
hOur hand
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
daTe
14
15
The chronograph can be started and stopped at any time by
pressing button A. Pressing button B resets the chronograph.
All hands will then return to their (0) position. The chronograph
second hand can be restarted by pressing button B once again.
If the chronograph second hand does not return to the (0)
position after the chronograph has been reset or after the battery
has been replaced, you should do the following. Pull out the
crown to the 2nd position. Press button A to set the chronograph
second hand to the (0) position. Push button A continuously until
the second hand returns to the (0) position. The chronograph
second hand can be advanced rapidly by continuously pressing
button A. Once the hand returns to the (0) position, push the
crown back to its normal position.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
The 3-hand mOdelS
uSe Of The CrOWn
To adjust the time or set the date, pull out the crown to the 1st or
2nd position. Then follow the instructions for the CEO Canteen
Style 3-hand models.
(Please note: this model does not display the day).
CeO TeCh
The ChrOnOgraph mOdelS
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown by turning it anti-
clockwise. Then follow the instructions
for adjusting the date and time and using
the chronograph on the CEO Canteen
Style chronograph models.
Once you have set the date or time or adjusted the chronograph
second hand, push the crown back to its normal position and
screw the crown clockwise back to the case.
hOur hand
(0) pOSiTiOn
buTTOn a
minuTe hand
24-hOur hand
CrOWn / nOrmal
CrOWn pOSiTiOn
buTTOn b
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
SeCOnd hand
daTe
14
15
The chronograph can be started and stopped at any time by
pressing button A. Pressing button B resets the chronograph.
All hands will then return to their (0) position. The chronograph
second hand can be restarted by pressing button B once again.
If the chronograph second hand does not return to the (0)
position after the chronograph has been reset or after the battery
has been replaced, you should do the following. Pull out the
crown to the 2nd position. Press button A to set the chronograph
second hand to the (0) position. Push button A continuously until
the second hand returns to the (0) position. The chronograph
second hand can be advanced rapidly by continuously pressing
button A. Once the hand returns to the (0) position, push the
crown back to its normal position.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
The 3-hand mOdelS
uSe Of The CrOWn
To adjust the time or set the date, pull out the crown to the 1st or
2nd position. Then follow the instructions for the CEO Canteen
Style 3-hand models.
(Please note: this model does not display the day).
CeO TeCh
The ChrOnOgraph mOdelS
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown by turning it anti-
clockwise. Then follow the instructions
for adjusting the date and time and using
the chronograph on the CEO Canteen
Style chronograph models.
Once you have set the date or time or adjusted the chronograph
second hand, push the crown back to its normal position and
screw the crown clockwise back to the case.
hOur hand
(0) pOSiTiOn
buTTOn a
minuTe hand
24-hOur hand
CrOWn / nOrmal
CrOWn pOSiTiOn
buTTOn b
ChrOnOgraph
minuTe hand
ChrOnOgraph
SeCOnd hand
SeCOnd hand
daTe
16
17
CeO pilOT
To set the time or adjust the date of the Limited Edition Swiss
Made CEO Pilot models, please follow the instructions for the
CEO Canteen Swiss Made 3 hands models.
hOW TO Care fOr yOur WaTCh
The TW Steel CEO Goliath (3 ATM), Pilot (5 ATM) and Tonneau
(5 ATM) models are splash-waterproof. The CEO Canteen and
Tech models are waterproof up to 10 ATM.
All watches come with a small cleaning cloth. Please use this
cloth when cleaning your watch, to avoid scratches.
WarranTy
All TW Steel CEO watches have a 2 year international warranty
against all manufacturing faults.
This warranty is valid under the following conditions:
• The watch must have been purchased from an authorised
dealer or ofcial agent.
• The guarantee card must have been lled in completely,
including:
- reference number of the watch;
- date of purchase;
- ofcial stamp of the dealer and signature of salesperson.
• You must present the warranty card together with your receipt
and the watch to the authorised dealer or ofcial agent.
• The warranty does not cover normal wear and tear and/or
damage caused by repairs by unauthorised persons.
CEO PILOT
SAPPHIRE CRYSTAL
SWISS MADE
minuTe hand
CrOWn / nOrmal
CrOWn pOSiTiOn
daTe
hOur hand
SeCOnd hand
(0) pOSiTiOn
16
17
CeO pilOT
To set the time or adjust the date of the Limited Edition Swiss
Made CEO Pilot models, please follow the instructions for the
CEO Canteen Swiss Made 3 hands models.
hOW TO Care fOr yOur WaTCh
The TW Steel CEO Goliath (3 ATM), Pilot (5 ATM) and Tonneau
(5 ATM) models are splash-waterproof. The CEO Canteen and
Tech models are waterproof up to 10 ATM.
All watches come with a small cleaning cloth. Please use this
cloth when cleaning your watch, to avoid scratches.
WarranTy
All TW Steel CEO watches have a 2 year international warranty
against all manufacturing faults.
This warranty is valid under the following conditions:
• The watch must have been purchased from an authorised
dealer or ofcial agent.
• The guarantee card must have been lled in completely,
including:
- reference number of the watch;
- date of purchase;
- ofcial stamp of the dealer and signature of salesperson.
• You must present the warranty card together with your receipt
and the watch to the authorised dealer or ofcial agent.
• The warranty does not cover normal wear and tear and/or
damage caused by repairs by unauthorised persons.
CEO PILOT
SAPPHIRE CRYSTAL
SWISS MADE
minuTe hand
CrOWn / nOrmal
CrOWn pOSiTiOn
daTe
hOur hand
SeCOnd hand
(0) pOSiTiOn
guaranteecard
SWISS made
canteen tonneau
Go LIatH tecH PILot
WWW.TWSTEEL.COM
CEO_SWISS_Cover_Garantiebewijs.indd 1 02-11-11 09:50
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TW Steel CEO Tech wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von TW Steel CEO Tech

TW Steel CEO Tech Bedienungsanleitung - Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch - 17 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info