Bedienungsanleitung U.N.O. TR 4.0 (Seite 4 von 39) (Englisch)

765111

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

IMPORTANT ELECTRICAL INSTRUCTIONS

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a

large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill

including the elevation mechanism and transport wheels.

NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%)

or more, the performance of your treadmill may be affected. Such conditions are not covered under your

warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for

proper testing.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a

pool or spa, or in any other high humidity environment. The operating temperature specification is 40 to

120 degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).

Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can

occur when a treadmill is first turned on or even during use. If your treadmill is tripping the house circuit

breaker (even though it is the proper current rating) but the circuit breaker on the treadmill itself does not

trip, you will need to replace the home breaker with a high inrush type. This is not a warranty defect.

This is a condition we as a manufacture have no ability to control. This part is available through most

electrical supply stores. Examples: Grainger part # 1D237, or available online at www.squared.com

part # QO120HM.

GROUNDING INSTRUCTIONS

This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a path

of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord

having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly

grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet

installed by a qualified electrician.

This product is for use on a nominal 230-volt circuit, and has a grounding plug that looks like the plug

illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to

connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The

temporary adapter should be used only until a properly grounded outlet, (shown below) can be installed

by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be

connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is

used, it must be held in place by a metal screw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

U.N.O. TR 4.0 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von U.N.O. TR 4.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info