727920
26
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
22
AmpliFi User GuideChapter 6: System
PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) is a virtual
private and secure connection between two systems that
enables encapsulated data transport.
PPPoE Username Enter the username used to connect to
the PPPoE server.
PPPoE Password Enter the password used to connect to
the PPPoE server.
Show Password Disabled by default. Select this option to
display the password in plain text.
Primary DNS Address Enter the IP address of the service
provider’s primary DNS server.
Secondary DNS Address Enter the IP address of the
service providers secondary DNS server.
UPnP Enabled by default. Universal Plug and Play
automatically configures port forwarding when you have
hardware that supports UPnP.
Clone MAC Address Disabled by default. Select this
option to clone a computer’s MAC address to the Router.
Enter the MAC address in the field provided.
This may be helpful if your service provider registered
the MAC address of the computer you had previously
connected to the modem. MAC address cloning allows the
Router to be recognized instead.
Bridge Mode Disabled by default, bridge mode can
help you grow your network and/or separate multiple
networks. It allows you to use more than one router on the
same network by placing one router in bridge mode and
connecting it to the client port on another.
Here are a few of the most common applications for
bridge mode:
Connect two routers to share network resources.
Use the Router as an additional access point on an
existing network.
Use the Router with a fiber service.
Wireless
The Wireless screen for the Router allows you to access
wireless network settings. Tap to save your changes.
General
SSID Name The name of the wireless network is
displayed. Tap to change it.
Password The password to the wireless network is
displayed. Tap to change it.
Verify Password To change the password, enter the new
password again.
Show Password Disabled by default. Select this option to
display the password in plain text.
Security Select the type of wireless security you use:
None, WPA PSK, or WPA2 PSK (recommended). WPA2PSK
is the default.
Hidden SSID Disabled by default. Select this option if
you don’t want the wireless network name or SSID to be
broadcast.
Guest
SSID Name The name of the guest wireless network is
displayed. Tap to change it.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ubiquiti AmpliFi - Home Wi-Fi System wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info