Bedienungsanleitung Uebler F34 (Seite 16 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Portugiesisch, Spanisch, Polnisch)

807845

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

- 14 -

Removing the bicycle rack

1. Fold the wheel rails (8) in the direction of the arrow (arrow I,

then arrow II).

2. Open the quick-release clamp (7), fold the rack frame (6) in the

direction of the arrow (arrow III) and close the quick-release clamp (7).

3. Remove the plug (12) from the socket (20) and insert it into

the plug holder2 of the wheel rail (8).

4. Unlock the bicycle rack (1) with the key (5).

5. Push the bag (18) onto the bicycle rack (1).

6. Press the safety lever (11) and swing the bicycle rack (1)

upright (arrow IV).

7. Pull the bicycle rack (1) back off the ball head of the towbar (19).

8. Put the bicycle rack (1) with the attachment (10) on the ground

and close the attachment (10).

9. Close the cover of the bag (18).

Mounting/removing bicycles

Attention

Do not fold in the wheel rails (8) with the tail lights (9),

as this may result in damage.

Note

The quick-release clamps (7) and the rack frame (6) must be

regularly cleaned with soapy water, especially if they are dirty

or stiff.

III

M+P-25A-0235

M+P-25A-0241

2. Not with Uebler F14 bicycle rack

Attention

The towbar rack is only intended for transporting bicycles.

Only bicycles, each no heavier than 66 lbs (30 kg), may be

transported on the rack.

The maximum load capacity of the bicycle rack, the weight on the

towbar, the gross vehicle weight rating and the gross axle weight

rating (see vehicle owner’s manual) may not be exceeded.

Otherwise, the cycle rack and the bicycles mounted on it may be

come loose, thus injuring other persons or causing an accident.

Attention

Before mounting, remove child seats and all loose parts such

as water bottles, saddlebags and E-bike batteries from

the bicycles and put them away.

The bicycles must be fastened evenly and with a low centre of

gravity on the bicycle rack. Each must be secured against

falling off using a holder on the bicycle frame and lashing straps

on the front and rear wheels.

Otherwise, the bicycles and/or loose parts could come loose

from the vehicle and lead to an accident with property damage

and injury to other road users.

Attention

There is a risk of injury if bicycles slip off or fall over.

Make sure that the bicycles cannot slip off or fall over.

Only put on and take off the bicycles with the help of

another person.

Attention

On some types of vehicle, the rack and the bicycles may be

positioned too close to the vehicle’s exhaust system.

The hot exhaust pipe and fumes can damage the rack and/or

the bicycles. In this case, the bicycle rack is not suitable for use.

For bicycles with carbon parts, consult the manufacturer/

dealer to find out whether they are suitable for transport on

the rack.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Uebler F34 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info