Bedienungsanleitung Uebler I21 (Seite 15 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Portugiesisch, Spanisch, Polnisch)

739068

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

- 13 -

Technical data

Attaching and removing the bicycle rack

Mounting the bicycle rack on the vehicle

1. Open the flap of the bag1 (18).

2. Press the safety lever (11) so that the attachment (10) comes

out.

3. Hold the bicycle rack (1) upright and push it with the

attachment (10) onto the ball head of the towbar (19).

4. Tilt the bicycle rack (1) downwards until the safety lever (11)

audibly engages.

The red marking on the safety lever (11) must no longer be

visible.

5. Check that the bicycle rack (1) is parallel to the bumper and

roughly parallel to the ground.

Shake the bicycle rack (1) to check that it is firmly fitted. If

necessary, take off the bicycle rack (1) and mount it again.

Maximum load (bearing capacity)

Uebler i21: If the vehicle/towbar has no

D-valuea (0) or the D-value ≥5.3 kN:

Towbar loadb – rack weight = max. payload

a See type plate on towbar

b If the values for the towbar and the vehicle are different, the

lower value must be used.

Towbar

load

Rack weight Max. payload

110 lb

(50 kg)

Uebler i21 = approx. 29 lb (13 kg)

82 lb

(37 kg)

132 lb

(60 kg)

104 lb

(47 kg)

154 lb

(70 kg)

126 lb

(57 kg)

≥165 lb

(≥75 kg)

132 lb

(60 kg)

Uebler i31: If the vehicle/towbar has no

D-valuea (0) or the D-value ≥6.7 kN:

Towbar loadb – rack weight = max. payload

Towbar

load

Rack weight Max. payload

110 lb

(50 kg)

Uebler i31 = approx. 35 lb (16 kg)

75 lb

(34 kg)

132 lb

(60 kg)

97 lb

(44 kg)

≥154 lb

(70 kg)

119 lb

54 kg

Power supply

Uebler i21, for max. 2 bicycles 13-pin, 12 V

Uebler i31, for max. 3 bicycles 13-pin, 12 V

Maximum tube diameter of bicycle frames

Round tube 2.9 inch

(75 mm)

Oval tube 2.9x1.8 inch

(75x45 mm)

Attention

The towbar and the vehicle must be suitable for mounting a

bicycle rack:

• Maximum towbar load (see type plate on the towbar and

vehicle operating manual)

• D-value of the ball head (see “Technical data” on page 14)

• The towbar must be made of St52-3 or stronger (see type

plate on towbar).

If not, the bicycle rack and the bicycles mounted on it may

come loose from the vehicle, injuring you and other persons, or

may cause an accident.

The ball head must be cleaned and degreased prior to

mounting.

Attention

Failure to take account of the altered vehicle dimensions

(width, height, depth) with the bicycle rack attached may cause

injury to you and other persons and/or cause damage to

property.

Please take account of the altered vehicle dimensions when

driving through entrances and narrow passages. Be careful

when reversing.

Attention

Check that the lights are in perfect working order before each

journey, otherwise accidents may occur.

1 Bag optionally available (for Uebler i21 rack item no. 19840, for

Uebler i31 rack item no. 19850)

M+P-25A-0209

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Uebler I21 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Uebler I21

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info