31.01.2022
11EN EN
f) Do not
or
cord should
the manufacturer‘s service centre.
g) T avoid electric shock, do not immerse the cord,
plug
the device on wet surfaces.
2.
a) Make sure the workplace is clean and well lit. A
messy or poorly lit
T
common sense when working with the device.
b) If you discover damage or irregular operation,
immediately
supervisor without delay.
c) If
of the device, contact the manufacturer's support
service.
d) Only the manufacturer's service
device. Do not attempt any repairs independently!
e) In case of re, use a powder or carbon dioxide
(CO2 )
electrical devices) to put it out.
f) Children unauthorised persons are to
enter a work station. (A distraction may result in loss
of control over the device)
g) Regularly
the labels are illegible, they must be replaced.
h) Please keep this manual available for future
reference. If this device
the manual must be passed on with it.
i) Keep the device away from children and animals.
j) The room treated with ozone must be sealed (all
external closed, gaps in doors etc.
sealed), mechanical
and ventilation
internal ventilation should be running in order to
facilitate the air ow
Open all internal doors in the room treated with
ozone (such as bathroom, cabinet etc.).
k) No humans or animals are allowed in the room
during
for reason, sure to it as
possible and wear protective clothing as well as
inhalation mask with appropriate cartridge.
l) Smoking, open ame, using tools generating
ame or sparks, using oils or grease or objects
contaminated with oil or
room treated with ozone.
m) Leave the room immediately after activating the
ozone treatment
n) Place
/ on the door of the room treated with ozone
REMEMBER! When using the device, protect
children and other bystanders.
2.
a) Do use the device when tired, ill the
inuence narcotics which
can signicantly impair the ability to operate the
device.
b) The device
(including children)
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c) The device can be handled only by physically t
persons who are capable of handling it, properly
trained,
the scope of occupational health and safety.
d) When
and stay alert.
using the device may lead to serious injuries.
e) T
make
connecting to a power source.
f) The device is
to ensure that they do not play with the device.
2.
a) Do not
function properly
o). cannot be switched on and o
using
be operated and must be repaired.
b) Make sure
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such
activating the device.
c) When not in use, store in a safe place, away
children and people
have not read
a hazard in the hands of inexperienced users.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially for parts or and
for
operation of the device. If damage is discovered,
hand over the device for repair before use.
e) Keep the device out of the reach of children.
f) Device
by qualied
This will ensure safe use.
g) T
not remove
any screws.
h) When transporting
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
i) Do not move, adjust or rotate the device in the
course of work.
j) Clean
from accumulating.
k) Do not cover the air intake and outlet.
l) The a
may not be carried out by children without
supervision by an adult person.
OZONE TREA
DO NO
1. Handle
2. A light informing that the device is operating
3. Ozone control knob
4. Time set knob
5. Air lter cover
6. Power socket and fuse socket
7. Air lter
8. Power cord
9. ON/OFF button
3.
APPLIANCE L
The
40
Ensure ventilation the room which device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects.
on an even, stable, clean, reproof and dry and
be the of and
mental and
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
m) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n) Keep the device away from sources of re and heat.
o) Do not overload the device.
p) Persons
the device.
q) Provide enough free
turning it on. Do not obstruct the ozone vent holes.
r) It
out the holes the Inhalation
high concentrations of ozone over a short period
as
over a
health or life!
A!
and its protective features, and despite the use of
additional elements protecting the operator, there
is
the
using the device.
3.
Ozon
The user is liable for any damage resulting from
unintended use of the device.
3.
AIRCLEAN 1
AIRCLEAN 1
1. air outlet
2. control panel buttons:
On/O – main on/o switch
Auto – auto mode operation
Timer – timer mode operation
Set – access to parameter setting mode
Up – increasing parameter values
Down – decreasing parameter values
3. display
4. remote control – description of buttons: same as
control panel buttons
5. lter
6. fuse socket
AIRCLEAN 2- ECO-ECO |
AIRCLEAN 5- WL
1. air outlet
2. operation indicator lamp
3. operation time selector knob
4. fuse socket
5. air lter
AIRCLEAN 7- WL- WL
1. Air outlet
2. Operation indicator lamp
3. Operation time selector knob
4. power cord connection
5. air lter
AIRCLEAN 1- ECO
1
2
3
4
5
5
4
12
3
2
1
5
6
3
4
4 3
12
7
6
8
5
9
