Bedienungsanleitung Umuzi Cleaning UZ-CL-VCR01-W - Robot (Seite 14 von 64) (Deutsch, Englisch, Holländisch, Französisch)

805631

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

EN-12

• Gently remove the dust container from the device by the handle.

• Open the dust container at the side, by gently pushing the lid upwards.

• Gently take out the filter screen (25) and HEPA filter (26).

• Empty the contents of the dust container into the trash can. It is recommended to empty the dust

container outdoors. WARNING! Breathing in dust when emptying the dust container can cause health

issues and allergic reactions.

• If the dust container is extremely dirty, use tap water to rinse the dust container. Dry thoroughly before

placing the filters back or placing the dust container into the device.

• Clean the filter screen (25) and HEPA filter (26) with the supplied cleaning brush (28). If the filters are

extremely dirty, you can vacuum both sides of the filters by using the crevice tool on the hose of your

vacuum cleaner.

• Carefully place the filter screen (25) and HEPA filter (26) back into the dust container and close the lid.

• Place the dust container (24) back into the device and secure the cover (7) back in place by pressing it

down.

Note! Never operate the device without the dust container or filters in place.

Cleaning the sweeping brushes

• Gently pull the sweeping brushes (12) o the brush attachment points (11).

• Clean the sweeping brushes with the supplied cleaning brush (28). Remove dirt and hair from the

sweeping brushes with a cloth or by hand.

• If the sweeping brushes are extremely dirty, use tap water to rinse. Thoroughly dry the sweeping

brushes before placing them back on the device.

• Place the sweeping brushes (12) over the brush attachment points (11) on the device.

• Press down the sweeping brushes. You will hear a click, which indicates the sweeping brushes are well

secured.

Cleaning the device

• Clean the device after each use.

• Switch the power switch (17) on the device to the “0” position and remove the power adapter from the

electrical outlet, if plugged in.

• Regularly clean the anti-collision (2) & cli sensors (8) with a soft dry cloth.

• Regularly clean the wheels with the supplied cleaning brush (28). If the wheels are extremely dirty,

clean with a damp cloth and thoroughly dry with a dry cloth.

• Remove the dirt and dust around and in the suction port (13) with the supplied cleaning brush (28),

preventing dirt and dust from accumulating at the suction port, which reduces the suction power.

• Never immerse the device in water or any other liquid.

• Clean the device with a damp cloth.

• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool; these will damage

and scratch the surface of the device.

• Thoroughly dry the device.

• Store the device in a dry place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Umuzi Cleaning UZ-CL-VCR01-W - Robot Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info