44
When the scanning of all normal banks ends, the scanner
scans a channel storage bank that is named Close Call Hits (if
enabled). This is a storage bank that automatically stores found
frequencies with any Close Call mode. You will see Close Call
Hits on the display. If the Close Call Hits bank is empty, the
scanner does not scan this bank.
In Scan mode, the upper line displays the current channel bank
number and the lower line displays and scrolls SCAN from right
to left with the direction indicator (↑or ↓).
Enabled scan banks appear on the lowest line. Disabled scan
bank numbers are not displayed. The currently scanned bank
number ashes.
• You can turn scan banks on/o by pressing 1-9 or 0, but one
scan bank must always be enabled. If you turn o all scan
banks, the scanner will display Nothing to Scan.
• If you want to change the search direction or if it is a long
transmission and you want to continue scanning, turn the
SCROLL CONTROL or press Scan.
When the scanner nds a transmission, it stops on it. When the
transmission ends, the scanner resumes scanning according to
the delay setting for each channel.
• To hold on a channel, press Hold.
• To step through the channels, turn the SCROLL CONTROL in
Hold mode. Press Hold to resume.
While monitoring a transmission, the upper line displays the
current bank and bank channel number (or name if tagged) and
the lower line displays the channel number in the scanner and
frequency with the direction indicator (↑or ↓).
