647705
23
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
23
Using the Radio Controlled Clock
3. Use or , or press the ON or OFF soft key to select the correct
option.
4. Once you have selected the correct setting, press E, then slide the
TIME switch back to Clock.
Note that turning on this setting tells the receiver to set the DST
according to the received NIST signal. It does not actually change the
time to daylight savings time unless it is appropriate.
Turning On/Off Radio Control
In some areas it is just not possible to receive the NIST signal. If this is
the case where you are, you should turn off the RCC option.
1. Slide the TIME switch to Clock Set. The hours setting starts to flash,
and the soft-key display changes to show the time-set functions.
2. Press the RCC soft key. The scanner shows the current RCC setting,
(ON or OFF).
3. Use or , or press the ON or OFF soft key to select the desired
setting.
4. Once you have selected the correct setting, press E, then slide the
TIME switch back to Clock.
Forcing a Reception Attempt
You can force the scanner to try to receive the NIST signal at any time.
This is sometimes useful if you are trying to find the best position for the
scanner and don’t want to wait until the beginning of the hour.
1. Slide the TIME switch to Clock Set. The hours setting starts to flash,
and the soft-key display changes to show the time-set functions.
2. Press the RX soft key. The dish icon ( ) and
RX icon starts to flash.
3. Slide the TIME switch back to Clock. The scanner will attempt to
receive the signal for 10 minutes. You can see the NIST signal strength
by referring to the signal bars next to the dish icon. When the scanner
successfully receives the time signal, the icon will stop flashing. If the
scanner cannot receive the signal within 10 minutes, the icon turns off.
UB338ZH(BC370CRS) 2/23/06 9:25 AM Page 23
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Uniden BC370CRS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info