Bedienungsanleitung Uniden BC785D (Seite 13 von 100) (Englisch)

647979

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

More user manuals on ManualsBase.com

Feature Highlights

• Trunk Tracking – Follow VHF High Band UHF 800/900MHz trunked public safety and

public service systems just as if conventional two-way communications were used.

• Digital Capable – With the APCO 25 Digital card (BCi25D) installed, you can monitor

supported project 25 systems.

• Multi-Track – Track more than one trunking system at a time. Scan conventional and

trunked systems at the same time.

• 1000 Channels – Program one frequency into each channel. You must have at least one

channel programmed to use the Scan mode.

• 27 Bands – Includes 27 bands, with aircraft and 800 MHz.

• 10 Banks – 10 banks with 100 channels each are useful for storing similar frequencies to

maintain faster scanning cycles or for storing all the frequencies of a trunked system.

• 25 MHz-1300 MHz – Indicates the range of frequencies that can be searched within the

bands of your scanner.

Note: The frequency coverage is not continuous and excludes the cellular band,

512-806MHz.

• 10 Priority Channels – You can assign one priority channel in each bank. Assigning a

priority channel allows you to keep track of activity on your most important channel(s)

while monitoring other channels for transmissions. You can also assign trunking priority

talkgroups.

• Priority Plus Scan – Allows you to scan only priority channels.

• Preprogrammed Service – Allows you to toggle through preprogrammed public safety,

news media, TV broadcast audio, Ham, CB, FRS, special low power, railroad, aircraft,

marine, racing, and weather frequencies.

• Unique Data Skip – Allows your scanner to skip unwanted data transmissions and

reduces birdies.

• Memory Backup – If power is disconnected, the frequencies programmed in your scanner

are retained in memory.

• Direct Channel Access – Go directly to any channel without entering the Menu mode.

• Attenuator – Reduces the signal strength on a per frequency basis.

• PC Programmable – Allows you to easily program all frequencies and Trunking Talk

Groups into your BC785D through Uniden E-Scanner software running on your PC.

– For more information on E-Scanner Programming software visit our website at

scanner.uniden.com.

• Turbo Search – Increases the search speed to 300 steps per second. This applies only to

transmission bands with 5 kHz steps.

• Text Tags – You can customize your scanner by storing text tags (up to 16 characters).

• Auto Store – The scanner automatically stores found active frequencies into an assigned

bank.

• CTCSS/DCS – The scanner can receive and search for subaudible tones.

• NWR-SAME Alert – The scanner is compatible with warning siren and message

transmissions.

• FIPS Code – Six digit FIPS Code (emergency and geographic area code) programmable.

BC785D 11/8/2 1:01 PM Page 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Uniden BC785D Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info