Bedienungsanleitung Uniden BC785D (Seite 71 von 100) (Englisch)

647979

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

More user manuals on ManualsBase.com

PLAN 1: Use Plan 1 if the last three digits of ALL the frequencies in use end in one of the

following three digits: 125, 375, 625, or 875 (example: 856.1125, 860.7375, 859.6625,

855.8875).

PLAN 2: If the last three digits of frequencies are less than 869.0000 and end in one of

the following three digits (125, 375, 625, or 875) and if ANY other frequencies end in (000,

250, 500, or 750) use Plan 2.

PLAN 3: If the last three digits of ALL the frequencies in use end in one of the following

three digits (000, 250, 500, or 750) use Plan 3.

PLAN 4: If the last three digits of frequencies are less than 866.0000 and end in one of

the following three digits (000, 250, 500, or 750) and if ANY other frequencies end in (125,

375, 625, or 875) use Plan 4.

Of course you will know the Control Channel frequency itself so that will help you determine

the proper plan. If you try one plan and you receive errors (such as the scanner jumping to

channels that are obviously not part of the system), you should try an alternate Plan.

Note: In Chain Search mode, Control Channel Trunk is activated in the Menu mode (See

page 20). You must choose one of 4 frequency plans. This plan applies only when

the scanner searches the 800 MHz range. Since a default plan is automatically

used when the scanner searches the 900 MHz range, a user does not need to

select a plan.

Note: You can assign a Fleet Map to TYPE 1 or Hybrid systems scanned in Control

Channel Only mode by going into the Menu. You can also program IDs, set a delay,

alpha tags and all the other parameters for systems scanned in this mode. You can

then either search the system to find new IDs or you can program IDs into memory

and then scan them.

Note: The Control Channel Only feature is an extremely powerful tool. You can use it to

determine if systems you are familiar with may have added new frequencies or you

can use it to discover new systems by simply finding active control channels (using

Search) and then programming them for Control Channel operation only.

Remember that this feature only applies to Motorola 800 and 900 MHz systems,

that you do have to set the Menu for the proper system type (800 MHz of Type 1 or

Type 2 or 900 MHz) and you do have to program the Control Channel frequency

into Memory and press and hold the TRUNK key to identify the frequency as

trunked.

Disconnect Tone Detect Option (End Code)

When this function is disabled, the radio looks for squelch before returning to the Control

Channel instead of waiting for the Disconnect Tone. Only in rare instances will you need to

adjust the default settings.

The condition to return to Control Channels depends on whether the signal is present or not.

To set this function ON/OFF, select 2:SCAN OPTION / 2:TRUNK - select bank

number- / :END CODE. Select 1:DETECT or 2:IGNORE.

BC785D 11/8/2 1:01 PM Page 67

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Uniden BC785D Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info