32
SETTINGS MENU
Press Menu then scroll to Settings and press E/yes.
Scroll to the options below and press E/yes.
Adjust Key Beep Auto Shutoff Restore Options
Battery Option
BCD436HP Only
Set Clock See Scanner Information
Band Defaults Replay Options Keypad Lock
(BCD436HP Only)
Adjust Key Beep
Allows you to turn the key beep on or off and adjust the volume level.
Auto sets the alert beep to the master volume level.
Off, Level 1-15, or Auto
Battery Option (BCD436HP Only)
Set Battery Save. On or Off.
Set Charge Time. 1-14 (hours). See also Using Rechargeable Batteries.
Set Battery Low
Set Alert
Set Alert Tone. Change tone frequency. (640 Hz, 780 Hz, 920 Hz, 1060 Hz, 1200 Hz)
Set Alert Interval. Set to a value between 1 and 60 seconds. (Default is 15 sec.)
Set Alert Volume. 1-15, Off, or Auto. (Default is Auto)
Set Voltage. 3100 - 3400mV. (Default is 3300mV)
Band Defaults
Use this menu to change the default modulation and frequency step or spacing used for each
band.
Scroll to each band you wish to edit and press E/yes. See also Default Bands.
Set Modulation
AM, NFM, FM, WFM, or FMB (Broadcast).
Set Step
5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz.
Auto Shuto
Allows you to set the scanner to shut off after a set time.
Off, 5, 10, 15, 30, 45 min, 1, 2, 3 hours.
Set Clock
Sets the clock for the display and the default tag for recordings.
Set Date
Set Year. Enter the year (2013-2099).
Set Month. Enter the month.
Set Day. Enter the day.
