Bedienungsanleitung Unify OpenScape Desk Phone CP205 (Seite 52 von 190) (Englisch)

680300

Zoom out

Zoom in

Vorherige Seite

1/190

Nächste Seite

Administration

A31003-C1000-M102-9-76A9, 08/2018

52 OpenScape Desk Phone CP100/200/CP205/CP400/CP600/600E HFA, Administration Manual

administration.fm

LAN Settings

3.2.2 VLAN

VLAN (Virtual Local Area Network) is a technology that allows network administrators to parti-

tion one physical network into a set of virtual networks (or broadcast domains).

Partitioning a physical network into separate VLANs allows a network administrator to build a

more robust network infrastructure. A good example is a separation of the data and voice net-

works into data and voice VLANs. This isolates the two networks and helps shield the endpoints

within the voice network from disturbances in the data network and vice versa.

In a layer 1 VLAN, the ports of a VLAN-aware switch are assigned to a VLAN statically. The

switch only forwards traffic to a particular port if that port is a member of the VLAN that the traffic

is allocated to. Any device connected to a VLAN-assigned port is automatically a member of

this VLAN, without being a VLAN aware device itself. If two or more network clients are con-

nected to one port, they cannot be assigned to different VLANs. When a network client is mov-

ing from one switch to another, the switches’ ports have to be updated accordingly by hand.

With a layer 2 VLAN, the assignment of VLANs to network clients is realized by the MAC ad-

dresses of the network devices. In some environments, the mapping of VLANs and MAC ad-

dresses can be stored and managed by a central database. Alternatively, the VLAN ID, which

defines the VLAN whereof the device is a member, can be assigned directly to the device, e. g.

by DHCP. The task of determining the VLAN for which an Ethernet packet is destined is carried

out by VLAN tags within each Ethernet frame. As the MAC addresses are (more or less) wired

to the devices, mobility does not require any administrator action, as opposed to layer 1 VLAN.

The phone must be configured as a VLAN aware endpoint if the phone itself is a member of the

voice VLAN, and the PC connected to the phone’s PC port is a member of the data VLAN.

There are 3 ways for configuring the VLAN ID:

• By LLDP-MED

• By DHCP

• Manually

3.2.2.1 Automatic VLAN discovery using LLDP-MED

This is the default setting. The VLAN ID is configured by the network switch using LLDP-MED

(Link Layer Discovery Protocol-Media Endpoint Discovery). If the switch provides an appropri-

ate TLV (Type-Length-Value) element containing the VLAN ID, this VLAN ID will be used. If no

appropriate TLV is received, DHCP will be used for VLAN discovery.

The implementation of a voice network based on VLANs requires the network infra-

structure (the switch fabric) to support VLANs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Unify OpenScape Desk Phone CP205 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Unify OpenScape Desk Phone CP205

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info