Bedienungsanleitung Unitec 10924 - SY 5005 (Seite 5 von 24) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

800215

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Accessories

Technical data

Electric circuit diagram

Inflating:

Always check the object

recommended pressure before

inflating it.

Inflating Toys and Balls

Maintenance, cleaning,

repairs and storage

Disposal instructions

1 Valve nozzle

2 12 V DC adaptor

3 Pressure gauge

4 Adaptors for various inflatables

• Schutzklasse: III

• Schutzart: IPXO

• Power source: DC 12 V

• Air hose length: ca. 45 cm

• Current consumption: max. 10 Ampere

• Weight: ca. 0.52 kg

• Max. air pressure: 10 bar / 150 psi

• Dimensions: w 13 x h 7.5 x d 12 cm

• Running time: max. 10 min

• Break: approx. 10 min

• Air inlet and discharge temperatures: Inlet: 0°C - 25°C

Discharge: 0°C - 70°C.

• Air inlet and discharge pressures: Inlet: Atmospheric pressure

Discharge: 10 Bar (1 MPa)

• Maximum pressure ratio: 10

• Maximum rotational shaft speed: 5000 rpm

1) Position the vehicle in such a way that the valve of the tyre to be inflated is at the bottom.

2) Now please connect the rubber tube having the snap valve to the tyre valve and then

press the valve lock down so that it firmly locks onto the tyre valve.

3) Please note that if a tyre is completely void of air, the vehicle should be raised using a

jack, so that no extra pressure will be exerted on the empty tyre.

4) Now put the plug into the cigarette lighter, so that the compressor is connected to the

power supply. Now the inflating process can commence. But do observe the inflation

pressure continuously in order to avoid excess pressure.

5) Please note that, the higher the pressure in the item being

inflated, the lower the air flow, because counter-pressure is generated in the item being

inflated. In addition, make sure that the specified pressure is not exceeded.

1) Please use the adapters provided, whenever you want to inflate balls, air mattresses or

any other inflatable items. Be extremely careful whenever inflating anything and note

the maximum pressure specified for it.

2) Moreover, take into consideration the fact that smaller items can be fully inflated

very quickly. Thus always observe them while pumping. If you adhere to the aforesaid

instructions, the compressor will serve you reliably for a long time to come.

Only clean when disconnected from the electricity supply.

• This electric appliance does not require special maintenance.

• Clean the device using only a slightly moist cloth. Do not use aggressive detergents.

• Store the compressor in dry and dust-free environment.

• The compressor is equipped with permanently lubricated, maintenance-free motor.

Never try to lubricate the compressor

• Repairs may only be carried out by qualified experts.

At the end of its useful life, do not dispose of this product in the domestic

refuse but at a point set up for the return of used electrical devices.

12V+

12V-

On/off switch

Motor

10924_Bed_A5_140912.indd 5 15.09.14 14:40

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Unitec 10924 - SY 5005 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info