Bedienungsanleitung Unold 28811 (Seite 23 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

111427

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Purging the system

Before preparing the first coffee or if the appliance has not 1.

been used for an extended time, inner tubes have to be purged

and filled again with water.

Open the lateral cover and check if the brewer assembly and 2.

the coffee grounds container have been inserted correctly.

Otherwise purging will not be possible. First insert the brewer

into the appliance until it latches into place, then insert the

coffee grounds container.

Close the lateral cover. (The lateral cover is fitted with a 3.

safety switch. The fully automatic coffee machine can only

be switched on when the lateral cover has been closed

correctly.)

Keep the 4. MENÜ/MENU button pressed and switch the

appliance on, using the EIN/AUS [ON/OFF] switch on the rear

of the appliance. Release the MENÜ/MENU button.

Turn the steam nozzle towards the drip tray or into a jug with 5.

a minimum capacity of 300 ml.

Turn the steam control on the right side of the appliance to 6.

EIN [ON].

Press the 7. MENÜ/MENU button and keep it pressed until at

least 50 ml of water have been discharged. Release the MENÜ/

MENU button, turn the steam control to AUS [OFF] and switch

the appliance off, using the EIN/AUS [ON/OFF] switch.

oPeration

QuicK guiDe: the first cuP of coffee

Fill the water tank.1.

Fill the coffee beans container.2.

Connect the appliance to the mains.3.

Check if the brewer assembly and the coffee grounds container 4.

are inserted correctly.

Check if the main switch on the rear of the appliance is 5.

switched to AUS [OFF].

Press the menu button and keep it pressed, switch the main 6.

switch on the rear of the appliance to EIN/ON, release the

menu button, turn the steam control on.

Place a jug (minimum capacity 300 ml) under the steam 7.

nozzle.

Press the menu button and keep it pressed until at least 50 ml 8.

have been discharged.

Turn the steam control off and switch the appliance off using 9.

the main switch.

Switch the appliance on using the main switch.10.

The display indicates „Standby“.11.

Press the Start button. The appliance starts the heating 12.

process.

Place a cup under the coffee outlet.13.

During the heating phase an automatic cleaning programme 14.

will be executed.

If the display indicates „15. Betriebsbereit/Ready“ you may obtain

your first coffee.

In the first grinding process, „16. Bohnen nachfüllen/Refill beans“

may be indicated, although the beans container is full. In this

case please press the corresponding coffee button again.

If necessary, purge the appliance.1.

Make sure that the drip tray and grid are correctly inserted.2.

Close the lateral cover. The lateral cover is fitted with a safety 3.

switch. The automatic coffee machine can only be switched on

when the lateral cover has been closed correctly. If the cover

is opened during operation, the appliance is automatically

switched off.

Before switching the appliance on, please turn the steam 4.

control on the right side of the automatic coffee machine to

AUS [OFF].

Switch the appliance on, using the 5. EIN/AUS [ON/OFF] switch

on the rear of the appliance. The display indicates:

STANDBY

Place a cup under the outlet.6.

Press the Start button. You will hear an operation noise. The 7.

automatic coffee machine is starting its self-test. The display

indicates the following message:

FUNKTIONSTEST

LÄUFT

This means that the status of the corresponding component of 8.

the automatic coffee machine is tested and the user executes

the corresponding operating step as required.

The following messages may be displayed during testing:9.

BRÜHGRUPPE

EINSETZEN

The brewer assembly is not

inserted or not inserted pro-

perly.

WASSERTANK

FÜLLEN

The water tank is empty and

must be refilled.

SATZBEHÄLTER

EINSETZEN

The coffee ground container is

not inserted properly.

DAMPFREGLER

ZUDREHEN

The steam controller is turned

to EIN [ON] and has o be tur-

ned off.

The message10.

FUNKTIONSTEST

LÄUFT

is displayed for a few seconds.

After the testing is concluded, the following message is 11.

displayed:

AUFWÄRMEN

This means that the automatic coffee machine is in the 12.

heating phase for approx. 2 to 3 minutes. At the same time,

an automatic cleaning of about 20 seconds is carried out.

During this process, hot water leaks from the machine, as

the inner brewing pipe, the brewer assembly and the outlet

nozzle are rinsed. This mechanism serves hygienic purposes

and improves the quality of the coffee.

Usually the following message is displayed after a few 13.

seconds:

BETRIEBSBEREIT

The automatic coffee machine is now ready for operation and 14.

you may brew your coffee.

Further proceeding is described in the chapter „Settings for 15.

the preparation of coffee“.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Unold 28811 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info