Bedienungsanleitung Unold 78316 (Seite 7 von 22) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

484958

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

OPERATION

CLEANING AND CARE

TROUBLESHOOTING

Use only for crushing pieces of ice! Do not use for chopping food.

Do not use ice cubes made of fruit juice, since they contain fruit acid. Fruit acid gums up the

grinder and can damage the appliance.

Caution: Never reach into the filling shaft or insert objects into the filling shaft -

danger of injury!

Clean all parts before using for the first time.1.

Connect the appliance via the power cord to 2.

the power supply (AC, 130 V, 50 Hz).

Turn on the appliance by means of the On/Off 3.

switch (set switch to I position).

Important: First turn on the ice crusher, then

add the ice cubes.

Remove the transparent lid that closes the 4.

filling shaft.

Put ice cubes into the filling shaft. If the filling 5.

flap does not automatically open from the

weight of the ice cubes, you can carefully press

the flap downward until the ice cubes fall into

the filling shaft.

Caution: Do not overfill! The safety flap has to

close automatically!

The transparent ice container catches the 6.

crushed ice.

If you wish to crush a larger amount of ice, 7.

turn the appliance off (set switch to 0 position),

remove and empty the ice container, then

replace it and continue with step no. 3.

To protect the motor from overheating, the 8.

appliance must be switched off for about

30 minutes after 4 minutes of operation.

Before cleaning, always turn off the 1.

appliance and unplug it from the power

supply.

Do not immerse the appliance and power cord 2.

in water or other liquids.

Wipe off the ice crusher with a damp cloth. 3.

You can clean the ice container and the lid

with warm dishwater; however, they are not

dishwasher-safe. Do not use any abrasive

scouring agents, steel wool, metal objects, hot

cleaning agents or disinfectants.

If the grinder needs to be cleaned, you can use 4.

a conventional bottle brush.

Moisten the bottle brush with warm dishwater, 5.

press the safety flap of the ice crusher

downward and carefully move the brush back

and forth in the filling shaft. Afterwards, rinse

the bottle brush with clear water and repeat

the above step.

Please exercise caution so that you are

not injured by the grinder!

The appliance and power plug must be 6.

completely dry before the appliance can be

operated again.

When completely dry, store the ice crusher in a 7.

dry, safe place so that it is protected from dust,

shocks, heat and moisture.

If ice cubes block the grinder

Turn off the appliance and unplug it from 1.

the power supply.

Remove the ice container, turn appliance upside 2.

down over a sink or a suitable bowl and hold

the protective flap open with your hand. Empty

the ice crusher, shaking it to loosen the ice.

Make sure that no water runs into the base 3.

of the appliance and that the appliance is dry

before you connect it to the power supply and

operate it again.

In case the motor still does not work, please 4.

send the appliance for inspection to our

after sales service (for address, see warranty

terms).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Unold 78316 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info