Bedienungsanleitung Unold 86410 (Seite 17 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

484977

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

preparing THe appLiance For operaTion

1. Ensure that you have selected a safe loca-

tion.

2. Comply with all safety instructions and

safety regulations.

3. Plug the mains plug of the appliance into an

electrical outlet (220-240 V ~ 50 Hz)

4. Select the desired temperature level on the

rotary regulator.

 Heating mode

„Low „for lower heating temperatures

(1,200 watt)

„High“ for more heat (2,000 watt)

 Fan operation

“Cooler” for the fan function (cool air)

5. Then select the desired temperature on the

rotary thermostat regulator. The regulator is

variably adjustable.

6. The appliance heats until the desired tem-

perature is reached, then the appliance

switches off. The appliance will switch on

again as soon as the room temperature

drops below the set temperature.

7. When you adjust the fan function, you must

place the rotary thermostat regulator on the

highest position.

8. To switch off the appliance, place the rotary

regulator on the OFF position.

9. Always switch off the appliance after use

by placing the rotary regulator in the OFF

position, and unplug the appliance from the

electrical outlet.

    







oVerHeaTing proTecTion circuiT

1. The appliance is equipped with an overhe-

ating protection circuit that switches the

appliance off when it is heated over 70°C.

2. If the overheating protection circuit has

been tripped, switch the appliance off,

unplug the plug from the electrical outlet

and let the appliance cool for at least 10

minutes.

3. Eliminate the cause of the overheating, (e.g.

excessive dust in the appliance, air outlet

grille is covered) and start up the appliance

again.

4. If after eliminating the cause, you still can-

not switch the appliance back on, or if the

overheating protection circuit switches on

without an apparent reason, contact our

customer service organisation.

cLeaning anD care

1. 

2. 

3. 

4. Never use any abrasive scouring agents,

steel wool, metal objects, hot cleaning

agents or disinfectants.

5. You can remove dust in the appliance if you

carefully hold a vacuum cleaner against the

air inlet and outlet grille.

6. Store the fan heater in a dry, safe place so

that it is protected from dust, shocks, heat

and moisture.

oSciLLaTion FuncTion / Swing FuncTion

1. With this function it is pos-

sible to distribute the air flow

over a larger area, because

the appliance swings back

and forth in a specific radius.

2. The oscillation function

can be switched on in every mode. To do

this, press the “Swing” button on the rear

of the appliance.

3. If you want to stop the appliance in a speci-

fic position, press the “Swing” button again.

4. Switch off the oscillation function before

you switch off the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Unold 86410 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info